What Have You Done To Your 2nd Gen Tacoma Today?

I could get to mine when I unpluged the whole assembly and I pushed them out from the back. I have a 2012 if that makes a differance

 

fitted some fans onto my amp rack, not what I originally planned but works none the less

 

LOL damn that was fast!

 

plasti dipped the bottom of my toolbox, and added the bed rail to the tool box


also got it a little muddy..

 

Did my 55k oil change, gave it a bath, and did the 886 reverse light mod.

 

finally got around to doing the fog light mod. best 5 bucks spent.

 

I always seem to post a day late. Yesterday I did the fogs on anytime mod, the alternating turn/marker light mod, found my devilhorns had turned pink so dipped them in bedliner. Today I got it dusty when I took my quad up to the hills to ride.

 

Finally welded my 4x innovations sliders on the truck. They've been sitting in the garage since before Christmas.

 

That rail is REALLY close to your antenna.
You were having SWR issues... have you rechecked with the rail in place?

 

Pics from the lift/caliper paint today....










The results

 

ya i just really had to wiggle it out with the screw driver it was a pain in the ass took only 10 mins so it wasnt to bad but MAP lights are complete and its F**KIN bright..lol

 

Bought winch for it.

 

which one?

 

Warn XD9000. I had one on my old pickup, loads of pulling power. Have a snatch lock or two as well. I'll make a tray for dual batteries once it's mounted.

 

Nice man I just put an m8000 on mine. the XD9 is a nice winch!

 

Thank you, the m8000 is a great choice and a lot of Tacomas here use them. However I like to have that little extra, as I do a LOT of winching. Just need synthetic rope and my bumper to arrive, and I'm all set to install it! Can't wait, I don't feel right going out without a winch

 

Just ordered a set of these earlier today. Should be here in a couple of weeks.........
https://www.treadwright.com/p-52-285-70r17-guard-dog-m-t-d.aspx

 

I hear you there, I've gotten my self pretty stuck before and i like having a winch. I only have a regular cab 4 banger the 8000 is plenty even without a snatch block. I also went with synthetic line it saved a TON of weight.

 

Nice truck!
I was looking at your front install pictures and have a question.
Is the bottom black spring plate up side down?
I can see the c-clip, shouldn't it be inside the black plate.
I'm doing the same install this weekend.

 

Yep, that's definitely upside down