Alabama thread!

Yep, come and get them if you want them.

It's dirty again but shining through the dirt.

I think I'm going to go with an led light bar behind the grille.

 

Dave is the undercover money man. haha. Truck Looks good man.

 

Dave, I would like to have the FJ rim you were talking about. Don't need a tire though. My stock spare is 265/65. I'm still looking for a 265/70/R17 used Duratrac for a spare though.

 

I truthfully can't remember everything. When you come get the lights, you can go through it all.

Edit: Brian, didn't even see your post. I have it sitting aside waiting for whenever the next time one of us makes the trip.

 

MUAH!!! I HAVE SOMEONE'S TOY TO PLAY WITH!
Haha. Alex brought his truck in this morning to get the front wheel bearings and seals replaced, and we will be checking out the left rear axle seal that is leaking as well.

 

did his seals start acting up after that last, very muddy meet?

If so, that meet is responsible for damage to almost all vehicles involved.

 

95% of it only fits a 2nd gen Tacoma though. Not much would be of use to you.

 

Well dang! Did you get my pm?

 

So i gotta drill some bigger holes on the tabs before the black magics will fit. but ive been thinking about doing the 500s on the 2 outer tabs and then for the 2 inside tabs putting these

Hella 007133821 Micro FF Series 12V/55W Clear Halogen Fog Lamp Kit

http://www.amazon.com/gp/product/B0...&pf_rd_t=101&pf_rd_p=470938631&pf_rd_i=507846
. yall think thatd look ok? i havent seen it done before. id get those and probly put a light tint or a gunsmoke lamin-x film on them.

 

Eh... Probably was, but didn't start to show till few days ago. But we will blame it on that ride! Haha. But can't wait to have it back. I know Bill will do good work! And he said he may even take pics of the process since we haven't had many pics lately. That's if he wants to. Thanks again Bill!

 

Damn, makes me want to check my seals. Everything has seemed fine though... *knocks on wood*

 

I didn't go through the back spot, but still knocking on wood though.

 

So what're the symptoms if this happens?

 

too much wood knocking going on around here

 

Bad wheel bearing=humming noise maybe slight vibration.
Wheel seals=uh...big puddles of diff oil leaking out of axel...mat woke up went outside and noticed it few days ago. Or just wait and listen for the rear end blow up...idk

 

Hah, so the noise, i'd have to have my earmuffs on not to hear it? Gotcha.

 

I'd just be aware of any abnormalities from the drivetrain. You know how your truck should sound and behave, if its different get under there and double check everything.

 

ya thats how i figured the bearings on the front were going bad then the noise started...but the rear, like i said, just started leaking few days ago. idk why either. but the drive to marion wasn't bad at all. except the road was foggy the whole time down and whole time back. weird ass road. def use all the lights you can when that road is foggy.