Rubbing issues...where and how to cut/chop...

So I have my Icon lift, TC UCA's, XD monsters, and 285 / 65 /18 Nitto Trail Grapplers installed on my 2012 Tacoma. I need to bump up the drivers side to offset the Taco Lean. I am getting some rubbing. It is actually hitting the fender corner closest to the passenger door.

I've tried searching, but I am not coming up with the right threads to help me determine how and where to cut. Anyone have any pointers or threads to suggest?

 

Im running toytec 3" with 285/70/17 and only spot i rubbed was mudflaps...took em off and no more rub at all....factory tundra wheels and 1.25" spacers as well....maybe crank your front up a little more??

 

Look for rub marks, cut.

 

Make sure to have it aligned and ask them to push the caster as far forward as possible while keeping camber at 0*.

 

Cranking the ride height up wont stop rubbing when the suspension cycles, assuming it will...

^^This^^ Dont be scared.