Official* Tacoma Mudflaps

"If not I'm pretty much screwed. . . "

I see what you did there.

 

So the plastic clip with the threads broke? Im assuming you mean to buy a nut to keep the flaps in place.

Do you still have your old bolts from your oem mudflaps? Check to see if the threads are different at all.

 

got mine installed these thing work great and look good to TAHNKS
Wayne

 

Yeah I put the screw through a few times because I didn't see at first that some of the short spacers were slightly different and worked better if I switched them front to back and I think what happened is the screw sunk through enough of the little plastic cone shaped deal on the backside that were just for the old flaps and so now that the screws are sunk into a free spinning piece of plastic on the backside I'm having a hard time getting the front one out because I have to access to the back. The rear I just clamped my gerber onto the piece of plastic and was able to set the screw correctly, the front that isn't possible.

I'm pretty sire this is just my error for putting them on a few times to test different spacers and just a warning to future people who purchase and install, don't be a dumb dumb like me and sink a screw into the back piece then break it off with all the twisting.

Great product, installer error on my side. . .

 

Order list updated.

 

Bump,

Would any one be interested in a rivet on mudflap extension for stock mudflaps trimmed or stock length?

 

Awesome. These should work great with my 285's. The stock flaps on the rear look tiny with these larger tires! LOL. I will post pics after the install.

Cheers.

 

RenoTacoma - check your PM's!!!

 

Got the flaps. I'll post a pic when I find time to install them. Thanks!

 

PM'D. Would like a full set for my truck. Please respond, thanks.

 

Hey Jay, pm'd you awhile ago regarding these flaps for the few of us bushwackers. check previous post within this thread for any info. terrific material for mudflaps to anyone considering them.

 

Yes i saw that. Thats why I want a set. I can't stand hearing the rocks on the paint. Your truck looks fantastic by the way, hopefully the OP can send me a set soon!

 

Just got in from the air port about an hour ago, I replied to all pms. Sorry about the long silence, I was on vacation in mexico and forgot to update this thread

 

PM sent

 

Same thing just happened to me. Before the bolt was tight, the black plastic plug began to spin and then, when I tried to remove it, the plastic kept spinning. I had to push down on the bolt to stop the plastic from spinning and now it's all fucked up! I'll mess with it and I'm sure I'll figure something out. PITA though.

 

Fixed the rear, front still sticks out a half inch or less haha oops

 

Pm sent again.

 

Payment Sent. Very excited to see these on my bushwacker flares. Thanks!

 

Bump order list updated. drade and I are working on a set for bushwacker fender flairs. Stay tuned

 

bump, shipped out a couple of sets today.