Anyone into R/C?

I put a hex on your ass... Get something that you can change out the tips on, 40 watts or more. Some jobs need a small fine "pencil" tip, some need some "mass" like a thick chisel tip, all depending on the task at hand. Glad you didn't burn your real girlfriend....

 

or dont dip the iron in gasoline

 

What can I say? She knows what I like.

 

Whatever the thing inside of the gun is start popping and crackling and about the time I had reacted and though, "Oh shit, this is gonna catch on fire." It did, and I threw it down. Cheap piece of shit.

 

Wait till your my age, she'll be the only one that "understands" you....

 

anybody wanna trade two 120a+ esc's for my 1/8th scales brushless system? lol (esc,motor, programmer)

 

brushed 540
brushless 550 4pole
brushless 6 pole

 

DON'T BREAK IT!!!

not any spare parts yet.
nobody has any in stock yet.

mine has been sitting for almost 3 weeks now waiting for steering knuckle.
frustrating as hell.


oh, and watch the temps with the interior in place.

 

^^^^ At first I was like, "Man, I've gotta have an exo." Then I was like, "Man I'm glad I didn't get an exo. They look like a royal pain in the ass."

 

I found at least 4 results for steering knuckles on ebay. They are out there. Part # AX80106

 

those are carriers for the knuckles not knuckles.
knuckles are part #AX80099

there have been 2 auctions so far for actual knuckles.
i am not going to pay $35 for a set of $3 parts.


folks are prob parting out kits....no spare parts have made it to rc vendors yet

 

These stock shocks suck dick. Just refilled them, cleaned them out, etc. Still suck dick.

 

Did you change seals/bushings/pistons? Are they the blue ones or the weird grayish hard-coated ones? AE shocks are a pain to build and get right, but do work and feel good when you do. Are your shafts worn?

 

So noob question,

What powers the Receiver and Servo in a nitro powered R/C?

I noticed looking at the manual for the SC10 GT there is now batt tray on the chassis.



Here comes the LOL.

 

batteries. either a small pack or multiple AAs

 

I see

 

you will need a "hump" style battery pack

DO NOT use the AA battery holder

http://www.amainhobbies.com/product...-60V-NiMH-Intellect-Hump-Receiver-Pack-IB1600

you can get LiPo receiver batteries as well

 

They're the blue ones like this.



I only messed with the rears. The shaft on one was bent. It's the one that continues to leak. I guess that's really the problem. the o-rings and stuff won't stay put with that rod being bent.

 

Those o-rings should not be able to move, if everything is snapped into place, even if your sporting a bent shaft, which is never a good thing. When your ready to replace the shafts, get the unobtainums.

 

fawking roll pins!!!