need some wheel help please!

Ok so I've been wanting to change out my factory rims for a while now and finally can. The only thing is I don't know what my offset is. Can anyone help me figure this out? I have an 07 4wd double cab trd. The rims I'm looking at have a 0 offset and Idk if that means that will work or not. Here is a link to the rims I'm looking at please let me know thanks.

http://www.discounttiredirect.com/d...e/viewProductDetail.do?v=014318|2007&pc=69630

 

You won't find a wheel that has the same offset as stock. What size tires are you wanting to run?

 

I'm planning on getting some 33s

 

The wheels will fit. 16 x 8, 4.5 BS with a 0 offset will fit fine. They will bolt-up, however they will stick out two inches outside of the fender so depending on the tire size you might rub. Personally I like the look of the wheels sticking out a little from the fender it gives it a simulated spacer look.

 

How much lift do you have?

Also many models of 16's don't clear the brake caliper so you would want to test fit these first.

 

Ya I like them sticking out too. I'm not too worried bout the tires rubbing I got a 3" lift on my truck so I know I can clear 33s no problem unless I'm wrong? Lol

 

How would I be able to test if I have to order them online?

 

With some trimming and a possible cab mount chop those would work.

You would have to find someone on here who is already running those.

 

Ok I'll have to ask around then thanks for the help guys!

 

I have a 3'' lift and I am running 285/70/17's which is a 32.7'' tire. You might have to do a little trimming but its very easy... Also you might rub on the cab mount, I am currently rubbing but only when backing the truck into parking spaces.
But you will want a rim with a 4.5'' back space and 0mm offset. I went to wheelsforless.com, they have a good policy on test fitting rims. Just make sure they fit before you mount the tires, also it never hurts to give the guys a call before you buy.