Will this work

I have a 2012 trd off rd dbl cab and was wondering if I got the blisten 5100's up front And put the toyotec 2" aal in the rear would this work without any problems or would I need to get anything else. I had also looked at the Blisten adjustable lift kit on toyotecs web site. Just wonder if it would be worth the extra $$$ or if this would work ok

 

It will work.

 

Yes this will work and a lot of people on here have that setup. Do you plan on doing a lot of off-roading?

 

No not in the near future I have a 04 for off roading right now

 

Oh okay. Yeah that lift should be fine for you.

 

Ok thanks. And I don't need to buy anything else correct?

 

No you should be good to go. What are you planning on setting your 5100's at?

 

I don't really know to be honest I was thInking 1.25 but what would be
Best with the 2" aal. Im new to this so idk what would be best

 

Depends on how you want your truck to sit. Since your getting a 2" AAL your gonna want to set it at 2.5" to level it out and even at that the rear end will stick up about a half inch higher then the front.

 

Ok so how much higher does the rear end set up right now stock? Or would I be better off getting a 1.5 aal to get it to be level with the front set at 1.25

 

You could go with a 1.5" AAL and set your 5100's at 2.5"s then you should be pretty darn level. 1.25" with a 1.5' AAL, your still going to sit rear end high.

 

Ok thanks that's what I will do I appreciate your help.

 

No problem.