Maxtrac Spindle Lift for 2nd Gen Prerunners

so the wierd steering thing is getting harsher, i had someone turn the wheel wile i watched, i saw nothing hit or anything wierd.

 

well i guess im fucked, it sound just like this

http://www.youtube.com/watch?v=z4lduZmPABo&feature=player_embedded#!

 

That doesn't sound too good.... Do the camburgs or total chaos spindles to this too?

 

its the bushing in the lca, yes, i dont know why it only started after the spindles

 

I have the exact same popping noise along with many others after installing spindles, even with my camburgs. There used to be a thread about it a while back but i dont get why the noise comes only after people install spindles. If its a bad bushing then how come it doesn't pop before or after? I mean everyone can't have bad bushings right after installing them

 

Ouch. Well there is a thread on how to replace em.

 

I have a small pop, but it's rare. Usually when backing up and then hitting the brakes, it pops.

My best guess would be, like extending the handle on a wrench. A short handled wrench can pull only so hard, but extend that wrench 4" and you can torque a Lot harder. Now, take that formula to an extended spindle, and it's pulling on the LCA with that torque.

I doubt it's bad bushings, just bad geometry.

 

this^

 

im not going to fix it, it only happens when going slow and turning

 

For what it's worth I called a local shop, asked about lift spindles and he said that he is showing them in stock at one of their warehouses... I asked him what brand and he told Maxtrac! He wanted to call his warehouse to make sure they are physically there... He is gonna call me tomorrow morning. Got my fingers crossed . Btw he told me $520 + CA sales tax. I will update what happens tomorrow

 

thats a pretty decent price !

 

Exactly what I was thinking... Called a different shop wanted 675. Hopefully this guy has them in stock I'll be getting them tomorrow

 

Psh doesn't beat me. I bought mine for 450 picked up.

 

I wish 450 lol that's a little unrealistic at this point ... Seriously can't wait for tomorrow I hope they got these spindles for me so I can get tires and start my build thread finally

 

Am If there are more than 1 can you please let me know.

Also do you guys know anything from these Bora Spacers? They say they have a .75" wheel spacer so that would be perfect for the rear so they both match.

Finally, HRD, When this distributor calls you, can you ask what batch they came from.

Thanxs

 

i got mine for 450 also

 

1.25 rears on mine almost match perfect, a 1" would

 

I bought mine for $363.00

 

how!? i called treadwright today and they said they are still working in 2-3 weeks and may be longer for the gy mtr sidewalls /:

 

I bought my MaxTrac's off of eBay when they were first advertising them. When they reworked them and jacked up the price, the new ones were sent to me at no extra charge. That was the original price for them.