Review: ImMrYo Rear-View Mirror Lift Bracket

for those guys who notched the headliner to accept the plastic piece, could you have just trimmer the plastic piece to avoid cutting the headliner? I am a bit hesitant to cut the liner.

 

Don't cut the headliner. The plastic piece comes off of the mirror and the wiring tucks up under the headliner.

 

x2

 

Can't wait for mine to come in so I can finally see through my windshield

 

No trimming required. Having the mirror this high hides the fact there is a wire there. Thus, eliminating the need for plastic covers.

 

Let me tell you about ImMrYo ... aka ... Jerry.

I was one of the first on board with this. A fantastic piece of machined metal.

Sent to me with the trust that I would return the $$$ in a self-addressed stamped envelope.

Looks as if if came from some high end aftermarket dealer.

Received an email warning me of overtightening due to one member cracking his windshield with the option of returning the piece.

Received another email saying that I could be expecting in the mail the 2nd generation of this piece. This one is curved to better fit the contour of the windshield. Said that if I wanted to change out the 1st one for a 2nd curved piece that was good for Jerry.

Received 2nd generation with a self-addressed stamped envelope to return the 1st one.

For the life of me this guy is out of this world.

We need to see Jerry on Shark Tank to go mass production with this and other ideas.

 

I am anal-retentive as hell ... ... I used the top cover to cover the wires, knowing I couldn't see them from where I sat but what the hell.

 

I could not have said it better myself. I installed the second gen last night. Much better fit with better padding. Amazing guy. Amazing product.

 

ImMrYo ... aka ... Jerry. Pm'd me yesterday. Can't wait to receive mine.
I'm sick of looking under the mirror to see if anything is coming from my left side.Gald there is still people around like him.

 

Received Version 1.1 from Jerry yesterday. Subtle change from Version 1.0, but follows contour of windshield better and just seems more solid. I was happy with Version 1.0--overjoyed with Version 1.1. And no, you do not have to notch the headliner. Just remove all plastic trim from mirror, route wire bundle and connector to passenger side of mirror, and stuff it up behind the headliner. You don't even notice the wire bundle. Hat's off to Jerry for a fine product and all of his hard work!!!!!!!

 

Got my PM. Checking mail box hourly.
. Cant wait to recieve mine. Its like christmas.

 

Mudy ... cut back on the coffee ... .

 

That head liner is too damn expensive to be cutting up. Just had an estimate for it, you would think a couple hundred would be reasonable to on the high side, boy was I wrong.

 

Receives 1.1 yesterday from Jerry - follows the window contour nicely! 1.0 is back in the mail to you, Jerry. Beautiful product.

 

Got mine in the mail today. Installed 5 minutes later. Very well made, completely unseen unless you know what was done. Completely cleared up blind spot! Thank you big time ImMrYo. Checks in the mail.

 

Got mine today and installed in minutes. I tucked the mirror wires and clip under the headliner. It fits perfect.

 

Just got mine. Put it on in the dark in 5 minutes. Fit is perfect. Its amazing how much was hidden behind the mirror before.

 

Got mine today and the check is going out tomorrow.

I've got a quick question:

It was getting dark, so I didn't get a chance to put it in.
I have a 2011 with just a plain old mirror - no wires or connectors. I also don't have a set-screw to remove it. I'm assuming post #74 in this thread is exactly what I have to do??

It says: "The 2005 has a plain rearview mirror that has a plastic clip holding it on behind the cover. Just pull down on the cover to get access to the clip. Behind the clip you will notice the metal bracket glued to the window has a notch in it"

When it says to "pull down on the cover", what exactly are you supposed to do?? Pull it towards me or down towards the dash??

Any help's appreciated....

 

got mine saturday and installed today. fit was great! money went out in the mail today!

 

Got mine today and my mirror is just a simple one with no wires too. All Idid was place my thumbs on the base of the mirror and applied pressure upwardkinda wiggling it back and forth and it popped off. Installation is a snap andI love how much it opens my vision!! The extension feels solid and fits snug! Ihighly recommend this to anyone especially if theyre over 6' tall!!

-NewSchool19