What have you done to your Tacoma today? 1st Gen Edition

With this mod everything still turns like it does stock. Basically the benefit from it is if you have a locker up front it allows you to disengage the 4x up front so you can turn. If you don't have a locker and you do this mod it basically gives you 2lo

If you have an arb up front then it doesn't really matter since its selectable any way. Unless you want the 2lo mod.

Also this would only benefit the j shift transfer case. Since the other one that has the push button 4x already does this basically.

 

What grit of sand paper did you use?

 

i have a rack similar to your and you have to put cross support for the legs inbetween the bed rails. when ya tie stuff down the sides of the bed move and fatigue the welds up top. you won regret doing this i promise. cause youll be angry when twice a year ya have to go back and re weld them

 

yes i will have a rear bar that holds it together in the back, and up front ill have a secondary mini rack that'll do that for me.

 

Lookin good!

Took my truck to Selective Audio & Customs to get the windows tinted, but I got there at 12:56 and didn't know they closed at 1:00

 

thanks man

did more today :cool

 

Nice! I like how the protection over the lights is slightly forward of the base.

 

Yep! that way its in front of the lights to keep tree branches off em

 

Damn that light rack is sick!! I'm getting a 18 or 22'' magnaflow next week Thanks for helping me decide

 

id go 18 between the too man! The 18 is amazing, 22 will be too quiet.

14'' for the mean sound

but good call on the magnaflow either way! you wont be disappointed!

 

Ya i said 18 or 14 to the guy at the exhaust shop and he said he would go bigger because I have to duals I don't want it too quite haha

 

DUDE! Just saw this. Jump on it! ^^^

 

ohhhh..yea 18 or 22 would probably be good then!

 

Ya he should know what he's talking about haha I'll let ya know how it sounds!

 

get some cool vids!

 

Ya i'll try! I'll see how well it sounds with my iphone recording haha

 

did the deckplate mod and sprayed the frame with undercoating also got a new pair of rack mounts for my shell because one was broken. good day for the taco!

 

Finally started wiring up my fogs. Got the relay put in as well as the grounds from both lights and from the relay its self. All I need to do now is tap into the head light and get the wires through the firewall and mount up the switch. Im trying to use the fog lights as such with the low beams on. I have searched up and down on here and other places trying to figure out which of the three wires to the head light is the low beam one. I read conflicting stuff saying one wire was both high and low so can anybody tell me which is which?

 

Painted my grille and light surroundings black

 

Heh... reminds me of