What Have You Done To Your 2nd Gen Tacoma Today?

Today, I threw in my Weather Tec mats and added the two hooks to the passenger side by drilling them into the carpet.
I also put a quart of oil in and cleaned out my engine. Now my engine/oil temp is really low.

This is before I cleaned under the hood, this makes it seem not that bad...

 

Just got done with the HID upgrade to 6K and the wiring of the auxilary fuse box. What do you guys think?

 

Looks sweet, but that cable is going to overheat and burn before that 150a breaker trips if you get into a 100+a overload situation.

 

Gonna be picking up my home made bumper from the sandblaster today and hopefully gonna be getting some primer on it later today before heading back to work.

 

I drilled 4 holes in the box and the bed then ran four 7/16th stainless steel bolts with washers and nylon lock nuts though the bed and bolted it down.

 

got home the other morning from work and felt like tinkering with my truck so i took my bull bar and nerf bars off. nerf bars were filled with water so that was my excuse for that. and now that they are off i dont feel like putting them back on and my use this opertunity to order sliders and an avid light bar

 

Just recently finished my first BHLM with TRS projectors on an extra set of headlights I have. As soon as I get at installing my new Kragen's behind the grill, I'll remove the original lights and mount these. Then I can begin work on customizing those. I will post up some pictures tonight when I get home from work.

 

Yup I need new rims lol...

Looks good tho

 

came out sick! surprised all that fit on top (I have an inline fuse holder for 3 fuses on mine, going to be adding circuit breaker once I get the rest of the stuff for my big three upgrade).

 

Not today... But yesterday I used it to drive a wheel barrow around to do some yard work.

Changed the spark plugs to a colder heat range. The old ones only had 15k on them but they were cooking! Also discovered that the stealership didn't torque them in properly when they had changed them. Asshats!

 

finished putting in new + battery terminal. worked out better than I thought, just need to trim the OE connector some, clean up and put the plastic cover back on. also ordered in the - terminal.

 

took it in for the last toyotacare oil change...and they had to replace the battery, it's required 4 jump starts in 2 days. turned it off at the dealer, walked in, did the paperwork, service tech came out 10 mins later...and no start. hopefully this battery lasts longer than 24,700 miles (it was free so no big deal if it doesnt).

 

Swapped out the black trim rings to aluminum rings on my Mickey Thompson Class Locks....

 

That looks great! At one time I even called MT to ask if the black locks could be sent with the polished rings and they told me no I would have to buy them extra. Kinda a turn off by the attitude on the phone. Oh well...at least they look as good as i thought they would... Nice job.

 

Thanks!

 

Pics??

 

Not yet.

Going to wait until I have a chance to align the back a little better. Probably this weekend.

 

Bad ass truck^^^

I got my trailhead Deflators and trasharoo today! Also purchased an ARB compressor for airing up and future lockers

 

A recent BHLM with TRS Projectors, Ya a bit dusty they have been sitting around for about a week.

 

What size tires are those ?