Overhead Console with Temp/Compass Display 2005 - 2008 - TAN/BEIGE

SOLD - NO LONGER AVAILABLE!


Overhead console with temperature and compass display plus the ambient temperature temperature sensor (not pictured) that fits in at the front of the truck. Works with 2005 - 2008 trucks and with the sensor will work with the 2009 - 2011 trucks.

This is tan/beige in colour. Note, I had the plastic around the temp/compass display painted tan to match the rest of the console. Should be plug and play for all 2005 - 2008 trucks and will work with the 2009 - 2011 trucks with the included sensor (have to run 2 wires from the console to the front of the truck through the firewall port).

$150 shipped anywhere in North America.

 

bump

 

bump

 

Nice good deal a lot of people want these

 

Something must be wrong with your computer - the pics are there.

Is anyone else having problems?

 

Pics are up, wish I had the money. GLWS

 

Just an FYI - the ambient sensor at the front of the truck is used on all
(05 to present) Tacoma's with the temperature console.

Most 6 lug wheel Tacoma's are pre wired for the front sensor.

The difference between the 05-08 and 09 to present consoles are in the respective consoles wiring schematic itself and they cannot be interchanged.
ie, a console out of an 06 will not work properly in a 2010 or vice vesa.

 

Check out this thread http://tinyurl.com/8y4p9fo - specifically post #10 where the OP states that running two wires to a 2005-2008 ambient sensor at the front of the truck will work and post #33 where one says he got it to work with the above setup.

My setup for sale will not work as a plug and play for 2009 - 2011 Tacomas - you have to run 2 wires through the firewall to the ambient temp sensor supplied with my console.

It will work as plug and play for a 2005 - 2008 Tacoma.

 

Has anyone painted one of these....I need a grey one.Thanks.

 

Puma, the factory consoles are grey.

Tunn, KevinVa never did the re wire and ended up buying and installing an 09 console. (post#24)

The author of post #33 joined in April of 2010, currently has a total post count of 2 with nothing posted since 2010

 

bump

 

where in Saskatchewan are you ? so i wouldnt need to add an out side temp sensor with this. my truck is a 2006 sr5.

 

This would work with your truck no problem as the wiring and connector is exactly the same.

Work in Moose Jaw, live just east to Regina.

 

bump

 

bump

 

bump