17x8

Which better for 33's? 17x8 -12mm offset at 4.53 Backspacing? Or 17x8 0 offset with 4.50 Backspacing? Looking at the ATX Ledge, or ATX Slot

 

Really all these forum members, 33 views and nothing

 

probably because there is not really a noticeable difference, the -12 offset will pop the wheel out just a little more than the 0 offset ... but you may never notice without taking measuring tape to it

 

4.5 done

Try searching next time. This has been brought up abourt 3.5 million times

 

I did search so lose the attitude. If you don't have anything nice to say, stay the hell out of the thread

 

17x8 with -12 backspacing is not 4.53 bs, it's 4".

I find it impossible that you searched and didn't find the answer to this. It's the second most commonly asked question on the entire forum.

 

Welcome to the internet

 

4.53 will definitely rub, stay away from those. You want the 4.51 backspacing if possible. 4.50 sticks out way too far