1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Replacing Control Arms & Brakes @ 161K, what else should I do while it's torn apart? Are Bilstein 5125 33-230337 the right shock for 1in rear block on 3rd gen TRD OR DCLB? Gland Nut Removal Is this an acceptable grease for the OME UCA's? Does this come with the Energy Suspension bushings? Vibration after 2 inch lift

Billstein 5100 easy install method

Discussion in 'Suspension' started by Holyfather, Mar 24, 2012.

Page 3 of 15
  1. May 23, 2012 at 5:17 PM
    #41
    Uplander

    #41
    Uplander Active Member

    Joined:
    Apr 29, 2012
    Member:
    #77841
    Messages:
    28
    Gender:
    Male
    Idaho
    Vehicle:
    2012 Barcelona Red DCLB Sport
    TRD Supercharger, URD 2.825" Pulley, TRD Exhaust, Moroso Catch Can, MB Chaos Wheels, 265/65/17 Hankook Dynapro's, 5100's @ .85", ARE MX Topper W/BedRug
    Just put on my 5100's set at .85". This video really helped me out and it was completely safe and easy to do. At no time was there any chance of having the spring fly off. Thanks!
     
    Uplander, May 23, 2012
    #41
  2. May 25, 2012 at 6:20 PM
    #42
    ManMan

    #42
    ManMan Well-Known Member

    Joined:
    Dec 18, 2011
    Member:
    #68945
    Messages:
    228
    Gender:
    Male
    I'll be trying this out tomorrow. Having had a spring slip off one of those crappy dual screw compressors, I was not looking forward to using one again!
     
    ManMan, May 25, 2012
    #42
  3. May 26, 2012 at 3:25 PM
    #43
    bunsojr

    #43
    bunsojr Well-Known Member

    Joined:
    May 10, 2012
    Member:
    #78571
    Messages:
    196
    Gender:
    Male
    Northern California
    Vehicle:
    2005 Silver DCLB
    Bilstein 5100s with OME 885 Medium Duty Dakar Leaf Springs SPC Upper Control Arms Pro Comp 7032 wheels BFG AT K02 in 275/70/17
    would our stock jack be sufficient to use for this method?
     
    bunsojr, May 26, 2012
    #43
  4. May 26, 2012 at 8:01 PM
    #44
    Holyfather

    #44
    Holyfather [OP] Well-Known Member

    Joined:
    Dec 21, 2011
    Member:
    #69182
    Messages:
    83
    Gender:
    Male
    Arizona
    Vehicle:
    2011 TX Pro TRD
    Front Bilstein 5100s @ 1.75"
    It might but i suspect that the stock jack might not go high enough ...
     
    Holyfather, May 26, 2012
    #44
  5. May 26, 2012 at 10:32 PM
    #45
    DDD

    #45
    DDD Shine bright like a hymen

    Joined:
    Mar 6, 2009
    Member:
    #14416
    Messages:
    2,303
    Gender:
    Male
    First Name:
    Derek
    Santa Clarita, CA
    No, please don't try it. You should really use a floor jack.

    A lot of people think this method is unsafe. I made the video and I think it is safe if you follow the instructions. But using the stock jack (which is a screw type, not hydraulic) may not work and could cause injury. A floor jack is much more stable because it has a much greater surface area on the floor and on the LCA.
     
    DDD, May 26, 2012
    #45
  6. May 26, 2012 at 10:41 PM
    #46
    livel0veryde

    #46
    livel0veryde Well-Known Member

    Joined:
    Jun 17, 2011
    Member:
    #58450
    Messages:
    954
    Gender:
    Male
    First Name:
    josh
    missouri
    Vehicle:
    Tacoma based buggy
    this is how i did mine..pretty easy install
     
    livel0veryde, May 26, 2012
    #46
  7. May 27, 2012 at 10:16 AM
    #47
    BTO

    #47
    BTO Well-Known Member

    Joined:
    Nov 12, 2009
    Member:
    #25836
    Messages:
    492
    Gender:
    Male
    California
    Vehicle:
    '07 Silver PR DC AT SR5 TP LSD
    Bilstein 5100s front, Adjustable Ranchos rear.
    Bite the bullet and buy a good floor jack. It's one of the best tools I ever invested in. I have two of them. You will use it over and over again if you like to do your own work. I can't imagine being without one.
     
    BTO, May 27, 2012
    #47
  8. Jun 3, 2012 at 11:10 AM
    #48
    Stockmonester

    #48
    Stockmonester Well-Known Member

    Joined:
    Aug 26, 2010
    Member:
    #42256
    Messages:
    1,415
    Gender:
    Male
    First Name:
    Nick
    Rome, Ny
    Vehicle:
    2019 v6 sr 4x4
    in channel vent visors
    when i jack up on the lca to compress the spring the whole side of the truck lifts up and doesn't look like the spring is compressing, the top nut on the shock doesnt look like it is moving. Am i doing it right or am i missing something?
     
    Stockmonester, Jun 3, 2012
    #48
  9. Jun 3, 2012 at 12:59 PM
    #49
    ae111black

    #49
    ae111black Well-Known Member

    Joined:
    Apr 16, 2012
    Member:
    #77004
    Messages:
    821
    Gender:
    Male
    First Name:
    Kimo
    Hilo Hawaii
    Vehicle:
    2013 Trd Sport
    plenty
    Sweet I wish I saw the Video before I did mine. All it cost me was 2 cold packs of beer to use my friends wall mounted spring compressor but the OP's method looks super safe and easy.
     
    ae111black, Jun 3, 2012
    #49
  10. Jun 4, 2012 at 11:34 AM
    #50
    BTO

    #50
    BTO Well-Known Member

    Joined:
    Nov 12, 2009
    Member:
    #25836
    Messages:
    492
    Gender:
    Male
    California
    Vehicle:
    '07 Silver PR DC AT SR5 TP LSD
    Bilstein 5100s front, Adjustable Ranchos rear.
    You are not understanding the concept behind this method. You are not supposed to compress the spring. This method is about slowly releasing the spring tension it already has.

    You jack up the truck (on the frame) till the wheels are off the ground and put on jackstands. Then you put the jack under the LCA to support it (it's being pushed down by the spring). Only jack the LCA a slight amount and then remove the two LCA bolts by the ball joint. You then slowly let the jack down which slowly releases the spring tension.
     
    BTO, Jun 4, 2012
    #50
    MidgetTosserr and lo2hi like this.
  11. Jun 4, 2012 at 2:18 PM
    #51
    Stockmonester

    #51
    Stockmonester Well-Known Member

    Joined:
    Aug 26, 2010
    Member:
    #42256
    Messages:
    1,415
    Gender:
    Male
    First Name:
    Nick
    Rome, Ny
    Vehicle:
    2019 v6 sr 4x4
    in channel vent visors
    That's what i did, the video shows the complete shock moving up that's what got me confused. So i was doing it right then just wanted to double check
     
    Stockmonester, Jun 4, 2012
    #51
  12. Jun 4, 2012 at 4:35 PM
    #52
    Holyfather

    #52
    Holyfather [OP] Well-Known Member

    Joined:
    Dec 21, 2011
    Member:
    #69182
    Messages:
    83
    Gender:
    Male
    Arizona
    Vehicle:
    2011 TX Pro TRD
    Front Bilstein 5100s @ 1.75"
    When I did mine it did that too. If you can get it up enough to get some of the threads through the top you can just tighten the nut to get it the rest of the way.
     
    Holyfather, Jun 4, 2012
    #52
  13. Jun 6, 2012 at 6:43 PM
    #53
    jerlane

    #53
    jerlane Well-Known Member

    Joined:
    Oct 8, 2010
    Member:
    #44393
    Messages:
    67
    Gender:
    Male
    Minneapolis, MN
    Vehicle:
    '11 TRD Sport DC LB 4x4
    I just posted a question on the original thread, but there seems to be more activity here... Are people all using a torque wrench when putting everything back together or just cranking everything tight by hand or with an impact wrench. Can anyone clarify what and where to mark the spindle? When loosening the LCA?
    Thanks!
     
    jerlane, Jun 6, 2012
    #53
  14. Jun 6, 2012 at 7:14 PM
    #54
    hillbillytoyo

    #54
    hillbillytoyo Well-Known Member

    Joined:
    Apr 2, 2009
    Member:
    #15494
    Messages:
    614
    Gender:
    Male
    First Name:
    Daniel
    WV
    Vehicle:
    17 Tundra Crewmax SR5 TRD Off Road.
    G2 bed cover
    I installed the 5100's today using this method and everthing went great. Thanks guys.
     
    hillbillytoyo, Jun 6, 2012
    #54
  15. Jun 6, 2012 at 7:19 PM
    #55
    Holyfather

    #55
    Holyfather [OP] Well-Known Member

    Joined:
    Dec 21, 2011
    Member:
    #69182
    Messages:
    83
    Gender:
    Male
    Arizona
    Vehicle:
    2011 TX Pro TRD
    Front Bilstein 5100s @ 1.75"
    I just cranked them down. Haven't had any problems with things coming loose but others might insist on using a torque wrench. Mine was premarked with yellow paint so I didn't have to mark mine. Also things lined right back up when I put it back together
     
    Holyfather, Jun 6, 2012
    #55
  16. Jun 7, 2012 at 11:46 AM
    #56
    hillbillytoyo

    #56
    hillbillytoyo Well-Known Member

    Joined:
    Apr 2, 2009
    Member:
    #15494
    Messages:
    614
    Gender:
    Male
    First Name:
    Daniel
    WV
    Vehicle:
    17 Tundra Crewmax SR5 TRD Off Road.
    G2 bed cover
    I anstalled my 5100's yesterday and took my truck in for an alignment today and they said they didn't know if they can get the camber down that much or not. What should I do?
     
    hillbillytoyo, Jun 7, 2012
    #56
  17. Jun 7, 2012 at 3:49 PM
    #57
    Stockmonester

    #57
    Stockmonester Well-Known Member

    Joined:
    Aug 26, 2010
    Member:
    #42256
    Messages:
    1,415
    Gender:
    Male
    First Name:
    Nick
    Rome, Ny
    Vehicle:
    2019 v6 sr 4x4
    in channel vent visors
    so im taking my front end apart loosening the top nut on the shock and its to the point where i cant hold the top of the shock from spinning can someone give me some insight? and yes im a noob at this
     
    Stockmonester, Jun 7, 2012
    #57
  18. Jun 7, 2012 at 6:34 PM
    #58
    hillbillytoyo

    #58
    hillbillytoyo Well-Known Member

    Joined:
    Apr 2, 2009
    Member:
    #15494
    Messages:
    614
    Gender:
    Male
    First Name:
    Daniel
    WV
    Vehicle:
    17 Tundra Crewmax SR5 TRD Off Road.
    G2 bed cover
    If you don't plan on re-using the old shock you could cut the plastic and hold the shock with a pair of pliers
     
    hillbillytoyo, Jun 7, 2012
    #58
  19. Jun 23, 2012 at 9:43 AM
    #59
    Raz4back

    #59
    Raz4back Well-Known Member

    Joined:
    Apr 17, 2012
    Member:
    #77081
    Messages:
    403
    Gender:
    Male
    First Name:
    Brett
    Benton, Arkansas
    Vehicle:
    2012 DC TRD Offroad 4x4
    Blacked out badges, Tinted Tail Lights, Fog Light Anytime Mod, Sock Monkey Bedside Decal, Painted Wheels, 20% Tint on Front Windows, 886 Bulb Backup Light Mod, Plasti Dip Rear Bumper (temporary until I get color matched), Color Matched Grill, Front Emblem, Door Handles, Mirrors, Bilstein 5100 all around, front set at 1.75, 1.5 aal, Crossfab light bar with 3 Hella Black Magic 500s, TRS Retrofit with D2S Projectors and Apollo Shrouds, BHLM with color matched Bowls and shrouds, CSJumper LED interior kit, CSJumper LED switchback DTRLs and Side Markers, 17x9 -12 Offset Ballistic Jester Wheels, 255x75x17 Nitto Trail Grapplers
    I used needle nose vise grips and held by the top. Once the nut is backed off too far to fold it this way, move the vise grips below the nut and clamp them on the threads.
     
    Raz4back, Jun 23, 2012
    #59
  20. Jun 23, 2012 at 1:22 PM
    #60
    cro

    #60
    cro Member

    Joined:
    Jul 8, 2010
    Member:
    #39941
    Messages:
    8
    Gender:
    Male
    Nor Cal
    Vehicle:
    sport 4x4 trd
    Hi all long time reader and first time poster. I finally installed 5100 on my truck yesterday using the method in the video. eg no spring compressor.
    I got a quote to have toyota do it and I said no way to $550 for just the fronts.

    At no time did I feel this method was dangerous at all. slowly lowering the LCA to take the pressure of the spring is very easy and a great way to do it.

    A couple of tips I would suggest though

    1. dont try and do this without moving the sway bar out of the way it makes life so much easier if you do.
    2. I tried the push the LCA down without loosening the adjustment bolts but found it impossible to get enough room to put the strut back in. I did however only loosen the rear adjustment bolt after marking them correctly.

    Thanks for the video and tips it made life much easier and cheaper.
     
    cro, Jun 23, 2012
    #60
Page 3 of 15

Products Discussed in

ALEOED M12x1.25 mm Self-Locking Nylon Insert Hex Lock Nuts, Pack of 6
$12.99
To Top