New England B.S. Thread

I did mine white but I used satin.

 

I'd go satin. It will give just a little bit of glimmer to contrast with the shininess of the lens.

 

I'd do satin. Flat always seems to show if the paint is different thicknesses.

 

Gloss but I cooked it a little to long and it turned to a flat black .

 

Satin it is!

 

Yay Satan!

 

Hey Denis, would you wanna do your headlights and mine together? My dad won't let me use the oven for my truck parts

 

Sure,just have to figure out when.
I have 4 small alligator clamps and will be picking up the 3M Window Weld tomorrow.

 

Sweeeettt!

 

Hey guys I just got back from a 3 day trip to a Hilton Hotel in Hakensack, NJ for a training seminar for my job. Was at Teterboro airport today for about 2 hours doing the practical of my training seminar. Had a great time down there.

 

Night and day difference between Projectors and reg bulbs. Just had my Retro done and I could not be happier. I wish I could do the lower Fogs, but alas... $$$$$ is always in the way!

 

Well, if you are doing the retrofit yourself you can save about $300. If you also do the instal yourself, you can save $1-200. A complete retrofit package from the Retrofit source during a group buy is around $250+.

 

Welcome back! Haven't missed much

 

Just found a Mitsubishi piece on our gauge PCB boards! Wtfffff!?

 

What the hell? They are infiltrating our trucks! NOOOOOO!

 

I KNOW!!!

 

What board was that and why were you screwing around with it at 1am?

 

That's the back side of this.

I was screwing with it at 1AM because I have no other time to do so and I finished up two gauge swaps last night! One for a guy in Boulder, and one for a guy in PA.

 

How long does it take you to swap the gauges?

 

Depends. One set I did for a Limited 4Runner. If I did ALL of the LEDs, probably close to 4 hours (I have ADD). The Sport Edition I did was about 2. It was really quick.

Last night I worked from 8:30pm to 12:30am, my new speed record! I usually do just one set per night.