My Build

I wanna see that with the lift and tires.. just do that to my truck and we could see.

 

Ill post pics tomorrow morning since its dark out now

Well I got the truck back today and I'm very pleased!
The tires and wheels come in on thursday but suprisingly the 225s still look good with the lift
The tires are 31x10.50 and the wheels are 15x8 flat black mickey thompsons and I'm searching for cheap beadlock rings (Aluminum please) if anyone knows where i can find a cheap set let me know. only 1 inch thin

 

Heres a pic of the truck with the lift, sorry if you can't tell hahaha you can definitely tell in person Wheels come in on thursday same with the BFG's A/T KO's 31x10.50

 

looks good dude..

 

looks good -- i really like the shop of the color matched -- i say go for it!!!

 

FINALLY GOT MY TIRES AND RIMS!!!!! I'm so happy with the results!!! there were some struggles I should let you all know because I had to do some mods to get this to work! here's pictures below







At the first time around the rim scratched against the brake caliper and so i grinded that down about 2mm



There was some damage done to the rim, but I grinded that down too and smoothened the inside so that it wouldn't scratch, but I'm very happy with the end results

ALSO CAN ANYONE TELL ME WHERE TO GET 4.10 GEARS and WHAT WILL THEY DO

 

What size tires are you running? Where did you get your decal from?

 

31x10.5 Falken A/T's
and I got the decal from Toyota
I had the option of the sport decal or off road decal
sport just looked better and if i ever got stuck offroading the off road decal would be hard to explain

 

Does anyone know how to clean aluminum rims, because a car wash was definitely a bad idea i have soap stains everywhere!

 

for the gears look on east coast gear supply's website. its in the used section

 

I am pretty sure you already have 4.10 gears stock....

 

i think that is only 6 lug 4cylinders. i think our 5lugs have 3.XX im not exactly sure.

when i colormatched my grill i took a dremel and took the surrounding part off of the middle part so i didnt have to tape anything. then i think i scuffed it up, sanded and primed. i also feel like i sanded the primer a little before going with the base coat. after the base coat i think i wet sanded before putting on the clear coat. i missed a few spots but they are very small and near the triangles but other than that i think it looks great especially since im no pro.

 

After searching some, you would be correct my friend.

 

the stock 5 lug has 3.58 gears i believe. when i get 31s one day i'll throw in some 3.91 gears with a locker but a good ways off

 

Also I was thinking about removing the decal and maybe getting a TX pro decal for both sides. Why? well the TX Pro decal IMO looks crazy awesome

 

nice bro. howd you black out ur lights?

 

whats your lift kit on this? looks very nice

 

Aye, thanks for the feedback I'll answer both your questions on my lift and taillights.

1. My taillights are after markets called Black Altezza's. Now I'm not trying to plug in a sponser or anything but I got them off of k2motor.com for about 90 buck's. THEY ARE WORTH IT!

2. My lift is the Fatbob's 2.75" lift which you get get off their website for about $230 (Kinda of a hassle to install) But also worth it

Hopefully that helped you

 

Either one is very sig worthy. Especially that bottom pic.

Nice 5 lug.

 

These pics are like a week old but I never updated my build thread...
BUT HERE THEY ARE!!!!!!!! 15x8 ION ALLOY 133 Wheels
Honestly so happy with the way these things look on my truck!!! Still running them on 31's