Headlight Beam Alignment

Changed my headlight bulbs to PIAA Super Whites. When I tested the lights they worked fine. However, the beams did not match as the right beam was higher the left. I rechecked the new bulb aligment/mounting and they were seated correctly.

Is this normal? Is there an alignment for the headlight? If yes, how do you do this?

 

I had to readjust mine when I changed my bulbs. Go HERE. This will show how to adjust them. Also check out some youtube videos on how to properly adjust the headlights.

 

Thank You for the info. The pictures had been deleted but that should get me in the ball park. Thanks again.

 

Well I have looked and looked and I just don't see the phillips adjustment screw. If the picture had not been deleted in the link I am sure I would see it.
TOTALLY frustrating.

 

Look at the 4th page and it will show you the locations of the vertical and horizontal adjustments.

 

On the horizontal adjustment there is a cover on the adjustment "screw" (it's more of a wheel with notches). Just lift the tap to expose it or remove the cover.

 

OK,...OK,...OK,...I finally figured it out. Pretty easy once you know what to look for. It's not a screw,..it's 8mm bolts. Horizontal adjustment has a quarter sized cover and Vertical has no cover and is below closest to the fender. I just wanted to be sure before I started tweaking things.

It seemed I had to turn a few times before I got movement.

Thanks again for your help. I love this forum.