1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Salvage old diesel fuel (heating oil) that has been seating for many years. Adhesive to bond neoprene to metal (painted) that sees varying temps? Large, Fine Thread Metric Tap and Die Set Recommendations? Variable speed wippers Need advice on crusty nut removal How Do You Store Your Cap/Topper?

Benchtop....

Discussion in 'Garage / Workshop' started by Pster, Apr 13, 2009.

Page 1 of 2
  1. Apr 13, 2009 at 12:29 PM
    #1
    Pster

    #1
    Pster [OP] Well-Known Member

    Joined:
    Jun 30, 2008
    Member:
    #7654
    Messages:
    2,736
    Gender:
    Male
    Charlotte, NC
    Vehicle:
    2006 Tacoma 4x4
    Bak Flip bed cover, shorty antenna, Peripheral iPod interface, Garmin 750 mount, add'l bed tie down rings, Westin nerf bars, hitch safe, tailgate lock, Ideal 1 3/4" turn-key clamp to secure tailgate from removal, Spare tire security cable, spare tire stainless air hose extender, Fumoto oil drain valve, Amp Research Bed X-Tender w/Schlage Cable Lock, bed mat, Redline hood struts
    I have a workbench that is 8 ft long and 36 inches deep. It is very heavy 1.5" or 2" MDF, so dimensionally very stable. But...I want to put a sheet of steel on the top to have a heavy duty work surface. Possibly stainless. Has anyone done this? If so, how did you attach it (bolts, industrial adhesive, etc.) and most importantly, where did you get it and how much? I am thinking I am going to have to find a metal supply and fabrication shop to do this for me (two of the four corners are rounded).
     
    Pster, Apr 13, 2009
    #1
  2. Apr 13, 2009 at 12:40 PM
    #2
    cvillechopper

    #2
    cvillechopper Jackass to the masses

    Joined:
    Nov 6, 2007
    Member:
    #3378
    Messages:
    637
    Gender:
    Male
    Charlottesville, VA
    Vehicle:
    '24 DCSB TRD Off-Rd, Premium Package
    Console lock-box, Studly Driver
    You can get sheets of 18ga (16ga if you really want to go nuts) from Lowe's or similar hardware store. Just use a propane torch and mallet to shape it then glue it down. I'm thinking of trying that once I get my new workshop built.
     
    cvillechopper, Apr 13, 2009
    #2
  3. Apr 13, 2009 at 12:48 PM
    #3
    Pster

    #3
    Pster [OP] Well-Known Member

    Joined:
    Jun 30, 2008
    Member:
    #7654
    Messages:
    2,736
    Gender:
    Male
    Charlotte, NC
    Vehicle:
    2006 Tacoma 4x4
    Bak Flip bed cover, shorty antenna, Peripheral iPod interface, Garmin 750 mount, add'l bed tie down rings, Westin nerf bars, hitch safe, tailgate lock, Ideal 1 3/4" turn-key clamp to secure tailgate from removal, Spare tire security cable, spare tire stainless air hose extender, Fumoto oil drain valve, Amp Research Bed X-Tender w/Schlage Cable Lock, bed mat, Redline hood struts

    Cool! Cville....you really think/know that Lowes sells these sheets? I'll check it out....this would be great. I can cut/grind down the corners....
     
    Pster, Apr 13, 2009
    #3
  4. Apr 13, 2009 at 4:17 PM
    #4
    cvillechopper

    #4
    cvillechopper Jackass to the masses

    Joined:
    Nov 6, 2007
    Member:
    #3378
    Messages:
    637
    Gender:
    Male
    Charlottesville, VA
    Vehicle:
    '24 DCSB TRD Off-Rd, Premium Package
    Console lock-box, Studly Driver
    I've picked up 4'x4' sheets from Lowes plenty of times and I'm pretty sure that I've seen larger sheets there. I'll check next time I'm there.
     
    cvillechopper, Apr 13, 2009
    #4
  5. Apr 13, 2009 at 4:20 PM
    #5
    TacoNut

    #5
    TacoNut IgnoringChrisWatchingEdLi veVicariouslyThroughMJP2

    Joined:
    Mar 29, 2008
    Member:
    #5597
    Messages:
    5,237
    Gender:
    Male
    First Name:
    Adam
    Denver, Co
    Vehicle:
    16 TRD OR DCSB Quicksand
    Last I bought ( a couple of weeks ago) a 4X8 sheet of 16 Ga. hot rolled was $61
     
    TacoNut, Apr 13, 2009
    #5
  6. Apr 13, 2009 at 4:30 PM
    #6
    Pster

    #6
    Pster [OP] Well-Known Member

    Joined:
    Jun 30, 2008
    Member:
    #7654
    Messages:
    2,736
    Gender:
    Male
    Charlotte, NC
    Vehicle:
    2006 Tacoma 4x4
    Bak Flip bed cover, shorty antenna, Peripheral iPod interface, Garmin 750 mount, add'l bed tie down rings, Westin nerf bars, hitch safe, tailgate lock, Ideal 1 3/4" turn-key clamp to secure tailgate from removal, Spare tire security cable, spare tire stainless air hose extender, Fumoto oil drain valve, Amp Research Bed X-Tender w/Schlage Cable Lock, bed mat, Redline hood struts
    Cool, thanks guys.......
     
    Pster, Apr 13, 2009
    #6
  7. Apr 13, 2009 at 4:32 PM
    #7
    Brunes

    #7
    Brunes abides.

    Joined:
    May 31, 2008
    Member:
    #7011
    Messages:
    17,560
    Gender:
    Male
    First Name:
    Rotorhead
    Around
    Vehicle:
    08 Red/Graphite and Satin Black
    Inside: Tint, Wet Okole 1/2 Piped Red/Black Covers, Black Weathertech Digital Fit Mats, URD Short Throw w/ TWM Weighted Knob, USA Spec iPod adapter. Outside: 4300K Retro w/ Angel Eyes and Red Shrouds, 5000K Blazer Fog Light Retrofit, Debadge, Bed Locking Handle, Satin Black Rims Performance: TRD/Steigmeier Blower w/ 2.7 Pulley. 668 Injectors and 320 LPH AEM Fuel pump. URD UCON and 7th Injector. DTLT Headers, URD Y-Pipe, Wicked Flow Muffler. Suspension: Both: OME Shocks Front: 886X's and TC UCAs Rear: Dakars Armor: Relentless Front Bumper Relentless High Clearance Rear w/ Tire/Rotopax Swing Out Relentless Front, Mid, and TCase skids BAMF Diff Skid Recovery and Spares: Fullsize Spare Tire 2x2 gal Rotopax 1x1 gal Rotopax 1x1 gal Water Rotopax Warn 9.5XP-S Winch Hi-Lift Extreme 60" Ironman Off-Road Recovery Kit
    Just curious...Why a metal top??
     
    Brunes, Apr 13, 2009
    #7
  8. Apr 13, 2009 at 4:38 PM
    #8
    Pster

    #8
    Pster [OP] Well-Known Member

    Joined:
    Jun 30, 2008
    Member:
    #7654
    Messages:
    2,736
    Gender:
    Male
    Charlotte, NC
    Vehicle:
    2006 Tacoma 4x4
    Bak Flip bed cover, shorty antenna, Peripheral iPod interface, Garmin 750 mount, add'l bed tie down rings, Westin nerf bars, hitch safe, tailgate lock, Ideal 1 3/4" turn-key clamp to secure tailgate from removal, Spare tire security cable, spare tire stainless air hose extender, Fumoto oil drain valve, Amp Research Bed X-Tender w/Schlage Cable Lock, bed mat, Redline hood struts
    I was fixing the brass manifold and backflow preventer for my irrigation system this weekend (brass valve just split....bad forging) and it ripped the shit out of the top of my workbench. I have always thought a steel top, polished and coated, would look good and hold up a lot better. My workbench is entirely metal except for the top. It is a Craftsman with metal pegboard backwall. I mounted an electrical strip on it and recently installed a Utilitech overhead light.......
     
    Pster, Apr 13, 2009
    #8
  9. Apr 13, 2009 at 4:50 PM
    #9
    Brunes

    #9
    Brunes abides.

    Joined:
    May 31, 2008
    Member:
    #7011
    Messages:
    17,560
    Gender:
    Male
    First Name:
    Rotorhead
    Around
    Vehicle:
    08 Red/Graphite and Satin Black
    Inside: Tint, Wet Okole 1/2 Piped Red/Black Covers, Black Weathertech Digital Fit Mats, URD Short Throw w/ TWM Weighted Knob, USA Spec iPod adapter. Outside: 4300K Retro w/ Angel Eyes and Red Shrouds, 5000K Blazer Fog Light Retrofit, Debadge, Bed Locking Handle, Satin Black Rims Performance: TRD/Steigmeier Blower w/ 2.7 Pulley. 668 Injectors and 320 LPH AEM Fuel pump. URD UCON and 7th Injector. DTLT Headers, URD Y-Pipe, Wicked Flow Muffler. Suspension: Both: OME Shocks Front: 886X's and TC UCAs Rear: Dakars Armor: Relentless Front Bumper Relentless High Clearance Rear w/ Tire/Rotopax Swing Out Relentless Front, Mid, and TCase skids BAMF Diff Skid Recovery and Spares: Fullsize Spare Tire 2x2 gal Rotopax 1x1 gal Rotopax 1x1 gal Water Rotopax Warn 9.5XP-S Winch Hi-Lift Extreme 60" Ironman Off-Road Recovery Kit
    ::nods:: Makes sense....I wasn't thinking about an in general workbench...Cause metal could mar car parts if you were working on there...but makes sense cause you can throw a mat or something down to protect car parts....but having a metal top to avoid damaging a wood work surface makes sense.

    Thanks!!
     
    Brunes, Apr 13, 2009
    #9
  10. Apr 13, 2009 at 4:54 PM
    #10
    Pster

    #10
    Pster [OP] Well-Known Member

    Joined:
    Jun 30, 2008
    Member:
    #7654
    Messages:
    2,736
    Gender:
    Male
    Charlotte, NC
    Vehicle:
    2006 Tacoma 4x4
    Bak Flip bed cover, shorty antenna, Peripheral iPod interface, Garmin 750 mount, add'l bed tie down rings, Westin nerf bars, hitch safe, tailgate lock, Ideal 1 3/4" turn-key clamp to secure tailgate from removal, Spare tire security cable, spare tire stainless air hose extender, Fumoto oil drain valve, Amp Research Bed X-Tender w/Schlage Cable Lock, bed mat, Redline hood struts
    Yep, I have rubber mats to put down when I work on more delicate items. But I want something I can hit with an errant screwdriver or hammer and not be bothered. I do EVERYTHING on my workbench....except wifee (and I wish she would)? :D
     
    Pster, Apr 13, 2009
    #10
  11. Apr 13, 2009 at 4:58 PM
    #11
    Brunes

    #11
    Brunes abides.

    Joined:
    May 31, 2008
    Member:
    #7011
    Messages:
    17,560
    Gender:
    Male
    First Name:
    Rotorhead
    Around
    Vehicle:
    08 Red/Graphite and Satin Black
    Inside: Tint, Wet Okole 1/2 Piped Red/Black Covers, Black Weathertech Digital Fit Mats, URD Short Throw w/ TWM Weighted Knob, USA Spec iPod adapter. Outside: 4300K Retro w/ Angel Eyes and Red Shrouds, 5000K Blazer Fog Light Retrofit, Debadge, Bed Locking Handle, Satin Black Rims Performance: TRD/Steigmeier Blower w/ 2.7 Pulley. 668 Injectors and 320 LPH AEM Fuel pump. URD UCON and 7th Injector. DTLT Headers, URD Y-Pipe, Wicked Flow Muffler. Suspension: Both: OME Shocks Front: 886X's and TC UCAs Rear: Dakars Armor: Relentless Front Bumper Relentless High Clearance Rear w/ Tire/Rotopax Swing Out Relentless Front, Mid, and TCase skids BAMF Diff Skid Recovery and Spares: Fullsize Spare Tire 2x2 gal Rotopax 1x1 gal Rotopax 1x1 gal Water Rotopax Warn 9.5XP-S Winch Hi-Lift Extreme 60" Ironman Off-Road Recovery Kit
    That sounds like a failure on your part....lol.:cool:
     
    Brunes, Apr 13, 2009
    #11
  12. Apr 14, 2009 at 6:26 AM
    #12
    Pster

    #12
    Pster [OP] Well-Known Member

    Joined:
    Jun 30, 2008
    Member:
    #7654
    Messages:
    2,736
    Gender:
    Male
    Charlotte, NC
    Vehicle:
    2006 Tacoma 4x4
    Bak Flip bed cover, shorty antenna, Peripheral iPod interface, Garmin 750 mount, add'l bed tie down rings, Westin nerf bars, hitch safe, tailgate lock, Ideal 1 3/4" turn-key clamp to secure tailgate from removal, Spare tire security cable, spare tire stainless air hose extender, Fumoto oil drain valve, Amp Research Bed X-Tender w/Schlage Cable Lock, bed mat, Redline hood struts
    You got that right.....I've either lost my touch or her expectations are unreasonable. Perhaps some of both. :p
     
    Pster, Apr 14, 2009
    #12
  13. Apr 14, 2009 at 6:41 AM
    #13
    Hotdog

    #13
    Hotdog My hair is all natural Moderator

    Joined:
    Feb 9, 2007
    Member:
    #872
    Messages:
    10,248
    First Name:
    Hotdog
    Vehicle:
    2007 PreRunner SR5 Double Cab
    Wet Okole Underwear
    I worked at a lawnmower shop and they put a stainless top on all their workbenches. That was probably 15 years ago, so my pricing will be pretty bad. Call around to a few different shops and get quotes. Some places really want the work and have taken the dropping steel prices into account.

    You don't want to do two different sheets, so you'll have to order it from a metal distributor. I would have them put two breaks (bends) in the metal to wrap around front edge, then have them shear(cut) the other side. They'll probably debur(smooth the edges) it, but request it anyway. It would take them about 15 minutes to do everything and the results are much better than you with the jigsaw out. Once you get the top delivered you can cut curves out with a jigsaw.
     
    Hotdog, Apr 14, 2009
    #13
  14. Apr 14, 2009 at 7:08 AM
    #14
    fletch aka

    #14
    fletch aka www.BeLikeBrit.org

    Joined:
    Jan 4, 2009
    Member:
    #12223
    Messages:
    7,079
    Gender:
    Male
    First Name:
    Gary
    Left Coast
    Vehicle:
    09 Magnetic Gray TRD OffRoad
    TRD cat back exhaust, TRD Cold Air Intake, differential breather mod' Hellwig rear sway bar, 16x8 TRD Ivan Stewart's, Michelin LTX A/T2, DTRL Stealth Mode Mod, custom "Texas Edition" shift knob, Sock's "Classic" bedside decals, MetalMiller custom grill emblem, 20% front tinted windows, tinted taillights, Viper alarm, ScanGauge II, Flyzeye Designs V2W Tacoma Interior LED lighting, de-mud flapped, de-badged, extra D-rings under bed bolts, WeatherTech ED floor mats, G4 Elite Fold a Cover ,Toyota bed mat, tailgate theft deterrent device and absolutely no plasti-dip!
    :eek:
     
    fletch aka, Apr 14, 2009
    #14
  15. Apr 14, 2009 at 7:32 AM
    #15
    longbow

    #15
    longbow I see you now..................

    Joined:
    Jun 26, 2008
    Member:
    #7586
    Messages:
    4,029
    Gender:
    Male
    First Name:
    Bill
    Indiana
    Vehicle:
    05 Tacoma Silver Mica TRD 4 Door
    Toy-tec Coil over lift, Eibach 700 lb springs, Sway bar relocate, Total Chaos UCA's, Moto metal wheels, BFG mudterrians, HID, custom 3 piece grill, Highlift jack w/custom mount, Highlift jack cover, bed matt, de-badged 100%, storage box lock mod, using defrost w/o AC mod, short antenna mod, horn re-locate, Tire Gate flat spare tire mount, engine cover painted, bed light (1) mod, wreck bar carrier, Blue Sea 5026 fuse block, center console outlet, flash light mod, Blue Sea inline fuse, Shrockworks sliders, All-Pro front bumper, Piaa 510 driving lights, Warn shackles front, Kennesaw rear bumper, "Tag Boltz" plate lights, Warn shackles rear, Warn M8000 winch, devil horns, BHLM, weathech liners front and rear.....T.W. sticker of course. Custom Sock bed decal for Michele
    I used a thick sheet of alum., but that was some years ago. To cut down on the shine I took an orbit sander with 80 grit, and did a jewel patteren on it. Held up for many many years, when I started working on guns I build a solid 3" thick 8' long, 30" wide red oak table top. Soaked it in linseed oil for a week. Would take serous hits with no worries.
     
    longbow, Apr 14, 2009
    #15
  16. Apr 14, 2009 at 7:37 AM
    #16
    chris4x4

    #16
    chris4x4 With sufficient thrust, pigs fly just fine. Moderator

    Joined:
    May 8, 2008
    Member:
    #6497
    Messages:
    112,751,674
    Gender:
    Male
    First Name:
    FlimFlubberJAM
    Tenoe, AZ
    Vehicle:
    2019 Rubicon 4 Door,
    4.10 gears, sliders, and lots of buttons.
    My last bench, I just used some heavy gauge sheet metal, and some 3M Super 90 adhesive...worked well.
     
    chris4x4, Apr 14, 2009
    #16
  17. Apr 14, 2009 at 11:05 AM
    #17
    Hotdog

    #17
    Hotdog My hair is all natural Moderator

    Joined:
    Feb 9, 2007
    Member:
    #872
    Messages:
    10,248
    First Name:
    Hotdog
    Vehicle:
    2007 PreRunner SR5 Double Cab
    Wet Okole Underwear
    the thought of having a metal edge exposed on the front of the workbench gives me the shivers just thinking about it. I'd be the guy that slices open my stomach and spills my guts all over my tools. :eek:
     
    Hotdog, Apr 14, 2009
    #17
  18. Apr 14, 2009 at 1:02 PM
    #18
    chris4x4

    #18
    chris4x4 With sufficient thrust, pigs fly just fine. Moderator

    Joined:
    May 8, 2008
    Member:
    #6497
    Messages:
    112,751,674
    Gender:
    Male
    First Name:
    FlimFlubberJAM
    Tenoe, AZ
    Vehicle:
    2019 Rubicon 4 Door,
    4.10 gears, sliders, and lots of buttons.
    LMAO!!!! I used some rubber molding to cover the sides. I had a small lip of rubber going over the sheet metal. Worked for head bumpage, and keeping things from rolling off of the table. One thing to consider, though, is becarfull when working with electronics that have exposed leads on a table with a steel top. I never cut or bumped my body in a bad way, but I did manage to spot weld a metal ruler to my table, and I somehow started a small fire.
     
    chris4x4, Apr 14, 2009
    #18
  19. Apr 14, 2009 at 1:50 PM
    #19
    Pster

    #19
    Pster [OP] Well-Known Member

    Joined:
    Jun 30, 2008
    Member:
    #7654
    Messages:
    2,736
    Gender:
    Male
    Charlotte, NC
    Vehicle:
    2006 Tacoma 4x4
    Bak Flip bed cover, shorty antenna, Peripheral iPod interface, Garmin 750 mount, add'l bed tie down rings, Westin nerf bars, hitch safe, tailgate lock, Ideal 1 3/4" turn-key clamp to secure tailgate from removal, Spare tire security cable, spare tire stainless air hose extender, Fumoto oil drain valve, Amp Research Bed X-Tender w/Schlage Cable Lock, bed mat, Redline hood struts
    In my case, the steel would be on top of MDF and I would buff edges.....radius corners.....grit polished for a nice swirl and then clearcoated.
     
    Pster, Apr 14, 2009
    #19
  20. Apr 22, 2009 at 5:57 PM
    #20
    Pster

    #20
    Pster [OP] Well-Known Member

    Joined:
    Jun 30, 2008
    Member:
    #7654
    Messages:
    2,736
    Gender:
    Male
    Charlotte, NC
    Vehicle:
    2006 Tacoma 4x4
    Bak Flip bed cover, shorty antenna, Peripheral iPod interface, Garmin 750 mount, add'l bed tie down rings, Westin nerf bars, hitch safe, tailgate lock, Ideal 1 3/4" turn-key clamp to secure tailgate from removal, Spare tire security cable, spare tire stainless air hose extender, Fumoto oil drain valve, Amp Research Bed X-Tender w/Schlage Cable Lock, bed mat, Redline hood struts
    I am now thinking about covering the bench with vinyl garage floor tiles. The benchtop is 24" deep, so 12"x12" tiles would work. Has anyone done this?
     
    Pster, Apr 22, 2009
    #20
Page 1 of 2

Products Discussed in

Mobil 1 104361 75W-90 Synthetic Gear Lube - 1 Quart (Pack of 2)
$28.12
NOCO Boost Plus GB40 1000A UltraSafe Car Battery Jump Starter, 12V Jump Starter Battery Pack, Battery Booster, Jump Box, Portable Charger and Jumper Cables for 6.0L Gasoline and 3.0L Diesel Engines
$99.95
M18 Cordless Lithium-Ion 6-1/2" Circular Saw - 2630-20 - ( MILWAUKEE ) - BARE TOOL
$123.99
LockNFlate Locking Air Chuck - Six Steel Jaws Lock onto Any tire Valve - Won't Leak or pop Off - Rated to 150 PSI - Open Flow
$39.99
LockNFlate Tire Inflator Bundle – Locking Air Chuck & Accessories, Heavy-Duty, 150 PSI Compatible
$44.99
Mechanix Wear: The Original Work Glove with Secure Fit, Synthetic Leather Performance Gloves for Multi-Purpose Use, Durable, Touchscreen Capable Safety Gloves for Men (Black, Small)
$23.95
CyclingDeal Quality Mini Grease Gun Injector - 80c.c. 3 oz One-Hand Operation Small Pistol Grip Compact Dispenser Injector - Standard + Long Nozzle
$24.98
MaxxHaul 70231 Hitch Mount Pick Up Truck Bed Extender For Ladder, Rack, Canoe, Kayak, Long Pipes and Lumber) , Black , 37 x 19 x 3"es
$59.99
Lexol All Leather Conditioner for Car Seats and Interiors, Couches and Furniture, Shoes and Boots, Bags and Jackets, Baseball Gloves and Horse Saddles, and More, 16.9 oz Bottle (Step 2 of 2)
$11.00
Lucas Oil 10574 RED"N"TACKY GREASE 1/LB TUB
$17.98
Holikme 40 Feet Dryer Vent Cleaner Kit Flexible Lint Brush with Drill Attachment, Extends Up to 40 Feet for Easy Cleaning, Synthetic Brush Head, Use with or Without a Power Drill
$27.95
T9 LED Circline Light Bulb, 8" 1600LM LED Circular Light, 13W Clear Cover 2700K Warm White Replacement for FC8T9 22-Watt Fluorescent Circular Bulb(FC8T9), Ballast Bypass Required
$27.99
Steck Manufacturing 23230 Plugweld Plier
$28.92
Streamlight 61702 Bandit 180-Lumen USB Rechargeable LED Headlamp with Elastic Head Strap, Clip, and USB Cable, Black
$27.48
EFIELD Washing Machine Outlet Box, 1/2" Pex Crimp Inlet with Center Drain, White
$27.48
DATA COMM Electronic 45-0031-WH Recessed Low Voltage Media Wall Plate w/ Built-In Duplex Receptacle Outlet, Cable Management - Elevate Your Home Entertainment w/ Stylish White Panel
$28.34
Brite Star Vintage Christmas String Lights Multi C9 25 Feet - Old-Fashioned Bulbs Perfect for Christmas - Patriotic Decorations, Indoor and Outdoor Use.
$28.49
Hudson Durable Goods Heavy Duty Waxed Canvas Apron for Men and Women, Adjustable Crossback Work Apron with Tool Pockets, Water-Resistant - Fits up to XXL, Black
$28.49
InsectGuard Permethrin Treated Tick Gaiters/Sleeves and Mosquitoes Flies Chiggers & More Insect Repellent Complete Package 3 (Black/Black)
$27.77
Powerwerx PanelPole1, Panel Mount Housing for a Single Anderson Powerpole Connector with a Weather Tight Cover
$27.99
Cordless Tire Inflator Air Compressor Compatible with Milwaukee 18V Battery, 160PSI Portable Handheld Air Pump with Digital Pressure Gauge for Cars Motorcycles Bikes Sport Balls(Tool Only)
$27.99
Honeywell Uvex Bionic Face Shield with Clear Polycarbonate Visor and Anti-Fog/Hard Coat (S8510)
$29.44
Bonide Annual Tree & Shrub Insect Control with Systemaxx, 128 oz Concentrate, Year Long Protection and Insect Killer
$29.67
Protebox 60 x 40" Under Grill Mats for Outdoor Grill, Double-Sided Fireproof Deck and Patio Protector Mat, Waterproof Oil-Proof BBQ Floor Pad Indoor Fire Pit Fireplace Mat
$29.99
Quickshine Silver Clean And Shine Bath
$29.99
General Tools MMD4E Digital Moisture Meter, Water Leak Detector, Moisture Tester, Pin Type, Backlit LCD Display With Audible and Visual High-Medium-Low Moisture Content Alerts, Grays
$29.69
Munikind 2 Pack Upgrade to 3600mAh Replacement Battery Compatible with 9.6V Ni-Mh Battery Compatible with 9000 9033 193890-9 192696-2 632007-4 6096D 6093D DA391D 6095D 5090D
$29.99
ZOHAN EM054 Electronic Shooting Ear Protection with Sound Amplification, Slim Active Noise Reduction Earmuffs for Gun Range
$29.99
Fluke TL175 Twistguard Test Leads, 2 mm Diameter Probe Tips
$29.99
waitley 12V 9Ah Replacement Battery Compatible with Milwaukee 12V Power Tools
$29.98
Cordless Soldering Iron for Milwaukee M18 18V-24V Battery, 30W Soldering Welding Gun Kit with Solder Wire, 5pcs Solder Tips for Electronics Welding Circuit Board, Appliance Repair（Not Include Battery)
$29.09
Arlington 8141DBL Siding Mounting Kits with Built-in Box, White, for 1/2" Lap Double Siding, 1-Pack
$29.99
Cordless Hot Glue Gun Compatible with Milwaukee 18V Battery, Mellif Handheld Electric Power Glue Gun Full Size for Arts & Crafts & DIY with 20 0.43" Glue Sticks (Tool Only)
$29.99
Klein Tools 3005CR Wire Crimper Tool, Ratcheting Insulated Terminal Crimper for 10 to 22 AWG Wire
$29.97
NANPU Air Sand Blaster Gun with Gravity Feed - Ceramic Nozzle, Metal Body | for Paint, Rust Removal, and Glass Etching | Versatile for Aluminum, Sand, Walnut Shells, and Soda Blasting Applications
$29.98
Extech TG20 Wire Tracer and Tone Generator
$29.35
MeBantoo Slide Bolt Gate Latch Hardware, Barrel Bolt Latch, 6.3" Heavy Duty Solid 304 Stainless Steel Silver Finish Lock for Wooden Fence/Shed/Yard/Barn Door/Interior and Outdoor (Silver)
$28.99
Sombra Warm Pain Relieving Gel, 2 Count
$29.78
Universal Motorcycle Vacuum Carburetor Synchronizer Synchronization Balancer Carb Sync Balancing Gauge Compatible with Honda Yamaha Kawasaki Suzuki GS KZ XS CB 550 650 750 850 900 BMW
$29.50
Inferno Stove Top Meter (3-30) thermometer measures temperatures on stove top
$29.95
ZANFEL - Poison Ivy, Oak & Sumac Wash: Topical Solution for Poison Ivy, Poison Oak, and Sumac
$29.55
Tooluxe 61077L Multi-Function Grease Gun and Lubrication Accessory Kit
$28.99
To Top