Icon/Wheelers 3 Leaf Progressive AAL

Does anyone have measuements on what they were at in the rear pre and post install? Preferably those of you that did NOT have the TSB upgrade. I'm trying to see exactly how much lift most are getting with this setup. Thanks!

 

It's just about 2.5 inches of lift

 

not sure how you got 2.5" on an aal??? ive just got a set and it gave just a hair under 1.5" its the wheelers pack although im about to take them right back off and go get the tsb done.

 

Wow really? Wheelers say 1.5 on these so that's very surprising. Maybe they mean 1.5 for those with the TSB? Hmmm

 

TSB 1" and Icon 3 leaf minus overload 1.5" for 2.5" total here.

 

That's more along the lines of what I was thinking. 1.5 for just the 3 leaf itself

 

Did you add the 3 pack of leafs to the factory two and remove the overload leaf? For a total of five leave now? Also I'm a total noob, what does tsb mean?

 

put the icon 3 leaf on my pro. took overload out, just a hair over 1 in rake now, it was level,,,,,,,if i left the overload in it would have a hair over 1.5-2.0 in rake..not sure how thick the overload was,, i like the little rake and the ride is better

 

I think im going to replace the leafs all together and go with a set of boss leaf springs. They say they will add 2 inches of lift.

 

I was at 21 before lift. now 24 with my overload. icon 3 leaf aal. when I first left the overload off it was 23.