something like coil overs for rear 2009

I know they don't make coilovers for the rear because it's leaf springs and a shock setup but what is an affordable way to lift the rear 1.0-1.5"' and have the ability to keep the rear at that height when the leaf springs eventually start to sag/settle?

Wheelers has a few options for the rear that say that they are for 0-2" of lift but I don't know if they lift the rear or are meant to be used with up to a 2" leaf pack or block set, so they make use off the extra travel from the blocks or leaf pack.

I want to lift the rear 1-1.5" and be able to keep it at that level by fine tuning as needed. I'm getting 2.5" Camburgs up front but want to be able to adjust the rear height the same way as needed.

 

Wow that was fast. That's what I was thinking too but I want to be able to dial out the imfamous Taco lean down the road as well.

 

I was also thinking about just getting AAL and when the drivers side sags to 1/4" more than the passenger side, just put a shim in it's place assuming there is enough left over threads on the U bolts.

But is there such a thing that allows you to fine tune the height?

 

Well I ordered the 2.5 Camburgs last night. I got my 265/75/16 Kumho adventure KL71's installed today. These tires look pretty wide for a 265 which was perfect. 33's in this size would be massive. Going to look sick with my 4.0" backspacing