trdNick's 07 Grocery Getter Build

Thanks, its a 3in spacer up front and a 2 in block in the rear with stock 265/70/16. I am working on getting Billstien 5100's, OME 885's and an AAL for the rear. I hardly do any offroading with it and I have no problems with it and no issues with alignment (stock UCA's, I got lucky)

 

well i Guess when I pull this out to reseal might as well do the BHLM

 

My Cobra 29 took a dump on me, the finals and the audio chip fried. I could receive but I couldn't transmit so I picked up a cheapo Cobra 19 and hid it away in the center console

 

Sucks. Especially after all that soldering. Know any reason I can't receive? But I can transmit

 

Yeah I was not a happy camper lol. Honestly no, my best guess would be to plug your coax into another radio to make sure your antenna set up is good, other than that I don't know much about the guts of the radio. Your transmit button on the mic might be stuck too, may want to try a different mic.

 

alright thanks, b/c at the moent im really sad too

 

I know the feeling, its frustrating. I started with a used radio that I got for 25 bucks, so I guess that was my problem haha

 

same here, i got a used one for 50 for the radio and whip and coax. Guy was a CB enthusiast though hah

 

So yours was probably taken care of

 

I had a gaping hole left in my center console by left by the old cb, so I had to come up with some way to undo the hack job.



I ended up cutting some corrugated plastic board and covering with outdoor carpet. It is not perfect but in my opinion looks a lot better.




I also did the 6 pack organizer mod!

 

Nice. At this rate I might need to do that to hah. I have some rear billies for sale

 

Still not working?

 

havent messed with it in a while but as of now no

 

Damn that sucks. Hopefully you can figure it out or get it fixed. I figured that any cb shop would look at me like I was crazy if I brought them a radio looking like mine, and it would probably cost more to fix it than the $40 radio I replaced it with. So I just bit the bullet and ripped it out. Kinda hurt my pride but now I have a fully functional radio so that made it a little better lol.

 

yeah i just cant get my self to do that, after all that soldering and crap

 

Yeah it was a lot of work. You could leave it for decoration lol

 

or just strictly a pa

 

Good looking truck man! Nice to see another Alabama fan on TW. Planning on upgrading tires soon? Some BFG MTs would look sick!

 

Haha that would work! Mine was so far gone that I couldn't even use the PA But yeah that would be a badass PA

 

Thanks man, and ROLL TIDE!!! Yeah I'm gonna let these wear down a tad then I'm planning on 255/85/16 BFG KM2's a little later on down the road