1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: UCA Bolt cut and replace What HD spring pack to get rear to aprox 24" Dakar or Wheeler? Broken AAL. Supreme Suspensions lift for 2019 TRD Offroad Inexpensive Suspension Lift Dealer says aftermarket suspension is cause of squeaking [Solved] Is this an acceptable grease for the OME UCA's?

Maxtrac Spindle Lift for 2nd Gen Prerunners

Discussion in 'Suspension' started by markmatters, Feb 11, 2012.

Page 66 of 688
  1. Jul 30, 2012 at 6:23 AM
    #1301
    sfcadams

    #1301
    sfcadams Retired Senior NCO

    Joined:
    Aug 13, 2011
    Member:
    #61645
    Messages:
    1,439
    Gender:
    Male
    First Name:
    Dan
    Elizabeth, Indiana
    Vehicle:
    2011 TRD Off Road DCSB Prerunner Skeewped
    Just curious,...

    What did you guys torque the two lower ball joint bolts/nuts to??
     
    sfcadams, Jul 30, 2012
    #1301
  2. Jul 30, 2012 at 7:12 AM
    #1302
    nfs257

    #1302
    nfs257 Well-Known Member

    Joined:
    Jun 22, 2011
    Member:
    #58691
    Messages:
    7,530
    Gender:
    Male
    First Name:
    Chris
    DFW
    Vehicle:
    She gone
    :notsure: they don't move though...
     
    nfs257, Jul 30, 2012
    #1302
  3. Jul 30, 2012 at 8:05 AM
    #1303
    anthony250f

    #1303
    anthony250f Well-Known Member

    Joined:
    Feb 18, 2012
    Member:
    #73066
    Messages:
    16,708
    Gender:
    Male
    First Name:
    Anthony
    San Diego, CA
    Vehicle:
    2008 dcsb trd offroad 4wd
    Tight as possible lol
     
    anthony250f, Jul 30, 2012
    #1303
  4. Jul 30, 2012 at 8:12 AM
    #1304
    markmatters

    #1304
    markmatters [OP] Viejon

    Joined:
    Nov 4, 2011
    Member:
    #66436
    Messages:
    1,311
    Gender:
    Male
    First Name:
    Mark
    Yuma, AZ
    Vehicle:
    2007 PreRunner
    Obviously less if you only have one ball...jk my one balled friends.
     
    markmatters, Jul 30, 2012
    #1304
  5. Jul 31, 2012 at 8:53 AM
    #1305
    Manwithoutaplan

    #1305
    Manwithoutaplan the full Monty

    Joined:
    Jan 30, 2008
    Member:
    #4500
    Messages:
    54,639
    Gender:
    Male
    ID
    Vehicle:
    07 Tacoma Speedway Blue Trd 4x4
    -Nitro 4.56 gears - Arb Front and Rear lockers. -Rear Swing out bumper Curiosity of ( Dept .94) https://www.facebook.com/Dept94 -Tinted, -ProComp 6 inch lift with Icon Coil overs and Bilstein's 7100Resi -315/70/17 - 17x8 in Pro Comp Matte black rims 4.5 bs -East Coast Gear Supply Sliders -ALL Pro EXP LEaf pack -Camburg UCA's -CAB mount CHOP
    how did everybody's install go??
     
    Manwithoutaplan, Jul 31, 2012
    #1305
  6. Jul 31, 2012 at 11:11 AM
    #1306
    sfcadams

    #1306
    sfcadams Retired Senior NCO

    Joined:
    Aug 13, 2011
    Member:
    #61645
    Messages:
    1,439
    Gender:
    Male
    First Name:
    Dan
    Elizabeth, Indiana
    Vehicle:
    2011 TRD Off Road DCSB Prerunner Skeewped
    Too easy (unless you put your stock springs/spindles back in as well, forget to take off the spacer lift that you had on them, and then wonder why your nose is pointing at the sky)


    I wonder who that guy was that did that.............????









    :spy:
     
    sfcadams, Jul 31, 2012
    #1306
  7. Jul 31, 2012 at 11:21 AM
    #1307
    Manwithoutaplan

    #1307
    Manwithoutaplan the full Monty

    Joined:
    Jan 30, 2008
    Member:
    #4500
    Messages:
    54,639
    Gender:
    Male
    ID
    Vehicle:
    07 Tacoma Speedway Blue Trd 4x4
    -Nitro 4.56 gears - Arb Front and Rear lockers. -Rear Swing out bumper Curiosity of ( Dept .94) https://www.facebook.com/Dept94 -Tinted, -ProComp 6 inch lift with Icon Coil overs and Bilstein's 7100Resi -315/70/17 - 17x8 in Pro Comp Matte black rims 4.5 bs -East Coast Gear Supply Sliders -ALL Pro EXP LEaf pack -Camburg UCA's -CAB mount CHOP
    well with tw007 we had to change the cup on the bilstein 5100. Le hiatt changed them on the truck he is the man :D.
     
    Manwithoutaplan, Jul 31, 2012
    #1307
  8. Jul 31, 2012 at 10:44 PM
    #1308
    twf007

    #1308
    twf007 Active Member

    Joined:
    Jul 5, 2011
    Member:
    #59385
    Messages:
    39
    Gender:
    Male
    First Name:
    Alex
    San Clemente, CA
    Vehicle:
    Tacoma Rock Lizard Buggy
    Buggy on tons, 40s, 4 speed atlas, 2rz, and Amazon products everywhere
    Haitt had a really sweet method of getting them off safer then using a coil compresser in my opinion.
     
    twf007, Jul 31, 2012
    #1308
  9. Aug 11, 2012 at 7:18 PM
    #1309
    moelov

    #1309
    moelov Well-Known Member

    Joined:
    Aug 19, 2010
    Member:
    #41920
    Messages:
    261
    Gender:
    Male
    USA
    Vehicle:
    09 PreRunner SR5 Lifted
    Removed the Mud Flaps, Rock Deflectors and Head Rest. Limo Tint, I had 3" Toytec Lift, Procomp Nitrogen ES6000 shocks and Struts. AllPro UCA, AFE Pro Dry drop in filter, WeatherTecs. Now I have LR UCA's, Maxtrac Spindles, Eibach's, 5100's up front, Expos, 5160 for the rear, U Bolt Flip Kit, and Extended Brake lines.
    Ok I have a question for those who have installed their own spindles.
    Im at the point that i have to install the tie rod but i can't get it to tighten. When I try to tighten the nut, the bolt on the ball joint just keeps turning.
    Any suggestions.
     
    moelov, Aug 11, 2012
    #1309
  10. Aug 11, 2012 at 8:04 PM
    #1310
    YotaMatt

    #1310
    YotaMatt Livin Low, Ridin High

    Joined:
    Mar 8, 2012
    Member:
    #74448
    Messages:
    5,185
    Gender:
    Male
    First Name:
    Matt
    West Point VA
    Vehicle:
    12 PreRunner DC TRD Sport
    Spidertraxx 1.25" spacers in front and rear, 4" Maxtrac Spindles,Billy 5100s at 0", OME 885 Springs, 1/4" top spacer on both sides, 1.5" AAL, 3" Block, 1.5" 4crawler driveshaft spacer, 17x9 XD Spys with 35x12.50 Nitto Mud Grapplers, Magnaflow offroad Stainless Exhaust, Volant Intake with scoop,Camo emblems, BHLM, Tinted tailights, Anytime fog mod,Alpine Type R 12, Kicker 1000 watt amp,600 watt 4 channel memphis and all memphis components, 35%tint front all the rest at 5%, Hella 500s with sylvania zxe bulbs, sylvania zxe headlights, sylvania zxe fogs, Weathertech digi fits, flyzeye blue/white, LED map dome license plate lights, Redline hood struts, Tailgate EZ Down, Custom TRD Camo Browning Edition Bedsides, Camo wet okoles, Ridgid Dually bed lights, SOS Concepts Tire Carrier
    Hit on it with a hammer while you try and tighten it..an impact would work the best
     
    YotaMatt, Aug 11, 2012
    #1310
  11. Aug 11, 2012 at 10:07 PM
    #1311
    anthony250f

    #1311
    anthony250f Well-Known Member

    Joined:
    Feb 18, 2012
    Member:
    #73066
    Messages:
    16,708
    Gender:
    Male
    First Name:
    Anthony
    San Diego, CA
    Vehicle:
    2008 dcsb trd offroad 4wd
    ok im a pro at this! had to do it alot last night....wedge a bottle jack against the bottom of the uca and the top of the tie rod.....or if the stock spindle is still on....put a jack under it
     
    anthony250f, Aug 11, 2012
    #1311
  12. Aug 12, 2012 at 6:58 AM
    #1312
    moelov

    #1312
    moelov Well-Known Member

    Joined:
    Aug 19, 2010
    Member:
    #41920
    Messages:
    261
    Gender:
    Male
    USA
    Vehicle:
    09 PreRunner SR5 Lifted
    Removed the Mud Flaps, Rock Deflectors and Head Rest. Limo Tint, I had 3" Toytec Lift, Procomp Nitrogen ES6000 shocks and Struts. AllPro UCA, AFE Pro Dry drop in filter, WeatherTecs. Now I have LR UCA's, Maxtrac Spindles, Eibach's, 5100's up front, Expos, 5160 for the rear, U Bolt Flip Kit, and Extended Brake lines.
    Na, what I was trying to explain is how to put it back. I have the new spindle installed just can't get the ball joint in the tie rod to tighten because it.keeps on spinning.
     
    moelov, Aug 12, 2012
    #1312
  13. Aug 12, 2012 at 9:12 AM
    #1313
    Davtopgun

    #1313
    Davtopgun Weeeee mod time!

    Joined:
    Feb 17, 2011
    Member:
    #51350
    Messages:
    6,153
    Gender:
    Male
    First Name:
    David
    Central Alabama
    Vehicle:
    2018 Tundra Platinum
    6112/5160 35" Toyo Open country
    I used a large C clamp at a slight angle to press them together while i tightened the bolt with a air gun.
     
    Davtopgun, Aug 12, 2012
    #1313
  14. Aug 12, 2012 at 9:21 AM
    #1314
    1stacoma

    #1314
    1stacoma Well-Known Member

    Joined:
    Jun 14, 2012
    Member:
    #80656
    Messages:
    525
    Gender:
    Male
    Austin
    Vehicle:
    2012 MGM SR5 DCSB 4.0
    5100's front and rear, front 2.5" rear 2" AAL, 18% tint front and rear, color matched grill. SCS wheels 275/70/17 BFG AT KO's. DTRL toggle switch.
    Clean the nut and threads on the tie rod as well as you can. Lubricate both and it should go on. If not try holding as low as you can on the threads with a pair of needle nose pliers than try to tighten. Do not over tighten that is why you have a cotter key. Also you might need a new outer tie if you replace it count the turns when you remove it. Put the new one on with the same amount of turns. It will keep the vehicle drive able until you get an alignment. Broken tie rod is bad news. Hope this helps.
     
    1stacoma, Aug 12, 2012
    #1314
  15. Aug 12, 2012 at 10:46 AM
    #1315
    anthony250f

    #1315
    anthony250f Well-Known Member

    Joined:
    Feb 18, 2012
    Member:
    #73066
    Messages:
    16,708
    Gender:
    Male
    First Name:
    Anthony
    San Diego, CA
    Vehicle:
    2008 dcsb trd offroad 4wd
    Yeah....you just put a bottle Jack against the top of the tie rod Nd the bottom of the uca
     
    anthony250f, Aug 12, 2012
    #1315
  16. Aug 12, 2012 at 2:02 PM
    #1316
    moelov

    #1316
    moelov Well-Known Member

    Joined:
    Aug 19, 2010
    Member:
    #41920
    Messages:
    261
    Gender:
    Male
    USA
    Vehicle:
    09 PreRunner SR5 Lifted
    Removed the Mud Flaps, Rock Deflectors and Head Rest. Limo Tint, I had 3" Toytec Lift, Procomp Nitrogen ES6000 shocks and Struts. AllPro UCA, AFE Pro Dry drop in filter, WeatherTecs. Now I have LR UCA's, Maxtrac Spindles, Eibach's, 5100's up front, Expos, 5160 for the rear, U Bolt Flip Kit, and Extended Brake lines.
    Ok I got it done! It was quite simple. I just got a rubber mallet and gave it a few pounds till it wedge in. From there it was good to tighten.
    Thanks for the replies! Now bleed the brakes and to get an alignment, hope the guys at the dealership understand how to align with the LR UCA. Cross my fingers!


    I will post pics after the alignment and the Suspension settles.
     
    moelov, Aug 12, 2012
    #1316
  17. Aug 12, 2012 at 8:26 PM
    #1317
    moelov

    #1317
    moelov Well-Known Member

    Joined:
    Aug 19, 2010
    Member:
    #41920
    Messages:
    261
    Gender:
    Male
    USA
    Vehicle:
    09 PreRunner SR5 Lifted
    Removed the Mud Flaps, Rock Deflectors and Head Rest. Limo Tint, I had 3" Toytec Lift, Procomp Nitrogen ES6000 shocks and Struts. AllPro UCA, AFE Pro Dry drop in filter, WeatherTecs. Now I have LR UCA's, Maxtrac Spindles, Eibach's, 5100's up front, Expos, 5160 for the rear, U Bolt Flip Kit, and Extended Brake lines.
    What I spent doing this weekend. An all new suspension.

    [​IMG]


    [​IMG]
     
    moelov, Aug 12, 2012
    #1317
  18. Aug 12, 2012 at 8:56 PM
    #1318
    sfcadams

    #1318
    sfcadams Retired Senior NCO

    Joined:
    Aug 13, 2011
    Member:
    #61645
    Messages:
    1,439
    Gender:
    Male
    First Name:
    Dan
    Elizabeth, Indiana
    Vehicle:
    2011 TRD Off Road DCSB Prerunner Skeewped
    Spindles with 5100s/Eibachs for right around 6.5" to 7" of lift??
     
    sfcadams, Aug 12, 2012
    #1318
  19. Aug 12, 2012 at 9:43 PM
    #1319
    YotaMatt

    #1319
    YotaMatt Livin Low, Ridin High

    Joined:
    Mar 8, 2012
    Member:
    #74448
    Messages:
    5,185
    Gender:
    Male
    First Name:
    Matt
    West Point VA
    Vehicle:
    12 PreRunner DC TRD Sport
    Spidertraxx 1.25" spacers in front and rear, 4" Maxtrac Spindles,Billy 5100s at 0", OME 885 Springs, 1/4" top spacer on both sides, 1.5" AAL, 3" Block, 1.5" 4crawler driveshaft spacer, 17x9 XD Spys with 35x12.50 Nitto Mud Grapplers, Magnaflow offroad Stainless Exhaust, Volant Intake with scoop,Camo emblems, BHLM, Tinted tailights, Anytime fog mod,Alpine Type R 12, Kicker 1000 watt amp,600 watt 4 channel memphis and all memphis components, 35%tint front all the rest at 5%, Hella 500s with sylvania zxe bulbs, sylvania zxe headlights, sylvania zxe fogs, Weathertech digi fits, flyzeye blue/white, LED map dome license plate lights, Redline hood struts, Tailgate EZ Down, Custom TRD Camo Browning Edition Bedsides, Camo wet okoles, Ridgid Dually bed lights, SOS Concepts Tire Carrier
    looks like he had billies set at 0" :notsure:
     
    YotaMatt, Aug 12, 2012
    #1319
  20. Aug 12, 2012 at 10:24 PM
    #1320
    sfcadams

    #1320
    sfcadams Retired Senior NCO

    Joined:
    Aug 13, 2011
    Member:
    #61645
    Messages:
    1,439
    Gender:
    Male
    First Name:
    Dan
    Elizabeth, Indiana
    Vehicle:
    2011 TRD Off Road DCSB Prerunner Skeewped
    yea, I was thinking billys at 0" and maybe Eibachs for the 1.6 or so they provide or something along the lines of that...


    I change my original thought and bet he is at 5.6" or so of lift....

    Maybe he will chime in.
     
    sfcadams, Aug 12, 2012
    #1320
Page 66 of 688
To Top