TW Live

rad is clogged with mud and can't breath. turn it off before you overheat the engine. aluminum no like extreme heat

and clean it from the inside so your not spraying all your pullies with mud and shit. I found that out the hard way

 

wow..means that most likely your motor is done! these motors don't like to be overheated, you will be lucky if you did not crack the block or warp the heads!

 

try this first before you get all panicky lol..

 

yea.......and LET IT COOL DOWN FIRST...........or you will crack the block


I play in mud more then I should and this is why I have mesh on my vents...well that and I can't afford what should be up top



also why my plate has (4) 3/8" bolts holding it in place so the water doesn't bend it up

 

i understand my man. whenever your build thread was up i remember reading it in class one day and my prof stopped and looked at me as i was holding back tears from laughing so hard. was hands down the best build thread on the site. . . anyway, awesome rig you have.

 

Am doing what ya'll suggsted - cleaning off the radiator. Will let you know how it goes when I get home. Definitely scared abt cracking the egine block, which was my first thought. Grrrrr Thank you!

 

pop the hood and let it cool first. spray inside out. put a fan on it of you can before spraying it down.


or you could just throw a bag of ice on it.... DO NOT DO THIS

 

Who is this... Besides Jessica Wabbit

 

wasn't she roger rabbits wife?

 

Interesting - even TinEYE - the reverse image lookup engine failed to find that pic.....

http://www.tineye.com/

 

Had these bearings in my skates many years ago....

 

Your grass looks better. And that's a peculiar-looking X Runner.