Programming Locks to Eliminate the Beep

Can anyone explain how to program the remote keyless entry so that the truck does not beep whenever it is locked or unlocked?
THANK YOU!

 

I too, would like to know if this is possible - the lights flashing is OK but I find the beep annoying....

 

I have an 08 and ever since I got it from the dealer it never beeped when I locked or unlocked it with the remote. It just flashes.

 

It's a 2009 thing.

 

Just reach under the hood and disconnect the chirp module.

 

its a 09 thing and it drove me insane

if i remember correctly

sit in the truck with the door open and insert the key
pull the key out and then reinsert it after 5 seconds and turn to the on position, but do not start

after 10-15 seconds press any of the buttons on the remote twice, and youll hear a chirp and its done

take the key out and it should be good to go

 

Thanks for the replies!
I tried the key/remote advice and I can't get that to work. The owners manual states "contact your Toyota dealer."
I'm not sure what the chirp module looks like? (sorry - I'm pretty clueless.....)

 

It's not an 08 or 09 problem. My 08 did it and turned it off. I can't remember how I did it but I'll post up if I remember.

 

my 08 didn't do it from factory, i had to make it do it myself Maybe you have the toyota alaram?

 

Posted in another area:

1. CUSTOMIZING FUNCTION

The following items can be customized.



NOTICE:

• When the customer requests a change in a function, first make sure that the function can be customized.
• Record the current settings before customizing.
• When troubleshooting a function, first make sure that the function is set to the default setting.
• If the battery is disconnected, the wireless answer-back buzzer will be returned to the default setting.

Item
Function
Default Setting
Customized Setting
Wireless remote control
Operation signal (Buzzer)
ON
OFF

(a) Open the driver side door and insert the key into the ignition cylinder.
(b) Remove the key from the ignition cylinder and, within 5 seconds, reinsert the key and turn the ignition switch to ON.
(c) After 10 seconds, the system enters answer-back buzzer switching mode.
(d) Within 10 seconds after answer-back buzzer switching mode is started, if a transmitter button (the same button) is pressed twice, the answer-back buzzer setting changes (off to on, or on to off) to activate or disable answer-back by buzzer.



HINT:

• The driver side door is closed.
• The ignition switch is turned off.
• The key is removed from the ignition cylinder.
• A transmitter button is not pressed for 10 seconds after answer-back switching mode is started.
• The transmitter is operated but the second button pressed is different from the first.
• Answer-back starts.

Thanks to beeftaco!!!
__________________

 

THANK YOU!!!! The beep is gone!! You are all great!!

 

Glad you got rid of the beep!

 

Welcome to TW!! Both of you.

 

So your 08 now does this? I had read that it was not possible for the 08's to have this option at all. I'm so confused......