Emergency lighting

strobes:
https://www.speedtechlights.com/product_detail.php?iid=1&catid=2&id=35

amber steady burns:
http://www.blitzpro.com/#ecwid:category=1885471&mode=product&product=8137541

 

All depends on what you're goin for. I went with a stealth kinda look

http://i39.photobucket.com/albums/e159/kd8bao/8c15a34d.mp4

 

What are some of y'alls opinions on color as far as LED hide-a-way in the front corners? Red, White, or both? I'm leaning toward Red/Red in the rear back up lenes. Just undecided on the front.

 

amazing setup i love it

 

Where did you mount the whelen hhs2200 siren and how painless was the install? How do u like the system overall?

 

I had a small multi mount that I put in the coin tray to hold the handset



Here is the brain box mounted behind the passenger back seat.



I drilled a 1" hole on the lower left corner of the utility box to pull all the wires and run them under the sill plates



And the siren and light controller is pc programmable.

 

I mounted the main unit behind the back drivers side seat in the capartment

i then mounted the controller in the garage door opener compartment i had to do a little trim work to the door to get it to fit but when it is in there the button on the outside can work the air horn or the 3 button function.

 

Looks like this is going to be the way to go! Thanks for the help!

 

Does anyone have pictures of lights being put into a hood scoop on the Tacoma's? If so what leds did you use and how bad was the install. I know this is a previously discussed topic but my ability to view the videos from Afganistan are limited and I believe that is all that had been posted.

 

http://i39.photobucket.com/albums/e159/kd8bao/5860e955.mp4

New falcon mini bar by axxitech. Was customized to have 4 led light heads in rear and 6 led light heads in front. Not a factory option

 

Cooooooool....

 

http://www.youtube.com/watch?v=EvhBVEs0LeU

my setup star mini phantom in the dash and lights from Amazon in the grill and rear window

 

What is it that you are running fot the license plates, and how or what did you do with the 3rd brake light?

 

The LP lights are axxitech XL6. I made a bracket for behind the plate to hold lights. Both the front and rear are for sale if interested just send me a PM.

As far as the high mount. I took out 2 of the 3 lights and replaced with LED HAW from Strobes and more. However I will be replacing and upgrading them to the Feniex Cannon shortly. The Cannon has a dual function so it will function as a brake light and then also as an emergency/warning light. We sell them also through our store front as well.

The LP Lights are on the store also.

http://wiredinstallation.com

Thanks for lookin.

 

I have a BAMF light bar how or what kind of lights can I use w/ it? I would rather not have to drill or anything into truck...

 

I was just in the process of doing this exact setup for my switches, except different labels. My 6 switches will be:
Front LEDs
Rear LEDs (up-flash / down-directional)
Directional control (up-left / down-right)
Wig-Wags
Left alley
Right Alley

Or I may change the last 2. Instead of separate alleys, I'll combine into 1 switch does both alleys and my last free switch will be strobes if I add them.

Then my 2 switch blanks on the left of the steering wheel will be rear back up lights and front led bar for off road use.

Here is my current lighting setup. I will be changing the front LEDs though. Instead of amber/white they will be amber/green.

FRONT:






REAR:






SIREN:






SWITCHES SOON TO BE ELIMINATED AND REPLACED WITH 6 CUSTOM OTRATTW SWITCH PANEL ON SUNGLASSES HOLDER:






AND A VIDEO

https://www.youtube.com/watch?v=Gs5z8NP9W7I&feature=youtube_gdata_player

 

NICE SET UP /\

 

Thanks! These are the new switches

 

Sub'd for future endeavors

 

I guess my old dash king isn't cutting it these days?!
Always wanted to do the grill lights just never wired up extras on the truck yet and didn't want to fry anything. I'll add that to ever growing list of extras I need/want!