1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Lighted Console-Cheap DIY Write-Up Wire sizing / light bar amp draw question Driving lights in fog light holes? Is this the fog light plug ? Amazon wiring harness? Cheap Switch Panels and Perfecting my Light Game

Blacking Out Headlights, How to

Discussion in 'Lighting' started by spencer_hong, Jul 31, 2007.

Page 20 of 41
  1. Feb 20, 2012 at 3:13 PM
    #381
    S7ICKlVlAN

    #381
    S7ICKlVlAN Cpt. Bubbleguts

    Joined:
    May 15, 2009
    Member:
    #17250
    Messages:
    1,372
    Gender:
    Male
    First Name:
    Dave
    Hawaii
    Vehicle:
    2012 TRD Sport DCSB
    TRD badged | Hunting Cage | Smoked Tails | LED Everything | Slim Cubby HID bi-xenon's | Spidertrax 1.25" | BHLM | FLM | S2000 Ant | 20% Shade | PL 8521 | OME 885 | Bilstein 5100's | Toytec 2" AAL | FN 18x9" Bronze BFD's | 275/65-18 Duratrac's | Wrinkle Red Valve Covers | 3M Di-Noc Wrapped Interior | Kode MB Push Button Ignition | Relentless Sliders | URD TCAI | Mr.Marv Enclosure | Arc Audio 10" | Hybrid Audio Clarus F/R | Alpine PDX-5 | Alpine INE-S920HD
    Voila!

    [​IMG]
     
    S7ICKlVlAN, Feb 20, 2012
    #381
  2. Feb 25, 2012 at 7:46 PM
    #382
    AstroluxAtom

    #382
    AstroluxAtom Well-Known Member

    Joined:
    Feb 25, 2012
    Member:
    #73581
    Messages:
    55
    Gender:
    Male
    Sunnyvale, California
    Vehicle:
    '05 v6 4.0L DCSB Offroad Prerunner Debadged
    3" Pro-Comp lift kit, Pro-Comp Tires, Magnaflow exhaust dumped at rear axle.
    Im planning on doing this mod, but I have plastic headlight protectors on my lights...Should I take these off before I go shoving them into the oven? They are a little dinged up anyways, so replacing the covers wouldn't be too bad of an idea.
     
    AstroluxAtom, Feb 25, 2012
    #382
  3. Feb 26, 2012 at 4:12 PM
    #383
    S7ICKlVlAN

    #383
    S7ICKlVlAN Cpt. Bubbleguts

    Joined:
    May 15, 2009
    Member:
    #17250
    Messages:
    1,372
    Gender:
    Male
    First Name:
    Dave
    Hawaii
    Vehicle:
    2012 TRD Sport DCSB
    TRD badged | Hunting Cage | Smoked Tails | LED Everything | Slim Cubby HID bi-xenon's | Spidertrax 1.25" | BHLM | FLM | S2000 Ant | 20% Shade | PL 8521 | OME 885 | Bilstein 5100's | Toytec 2" AAL | FN 18x9" Bronze BFD's | 275/65-18 Duratrac's | Wrinkle Red Valve Covers | 3M Di-Noc Wrapped Interior | Kode MB Push Button Ignition | Relentless Sliders | URD TCAI | Mr.Marv Enclosure | Arc Audio 10" | Hybrid Audio Clarus F/R | Alpine PDX-5 | Alpine INE-S920HD
    It'd be best to pull them. 200* ain't that hot, but you wouldn't wanna take any chances for warp.
     
    S7ICKlVlAN, Feb 26, 2012
    #383
  4. Feb 27, 2012 at 1:06 PM
    #384
    Kavik

    #384
    Kavik Kavik

    Joined:
    Jan 30, 2012
    Member:
    #71810
    Messages:
    3,360
    Gender:
    Male
    Texas, DFW
    Vehicle:
    Not your everday 5 lug
    Lowered: 3 inch drop blocks (Beefed Taco),Satoshi Grill, Morimoto bi-xenon H1 Retrofitted headlights, Flowmaster exhaust, Blue LED interior and exterior, blue LED dome light, Anzo black LED taillights, Hifonics Brutus 1100w Mono Block, Bazooka 300w Amp, LED license plate lights. Lifited: Fat Bob's rear shocks, Fat Bob's 3" spacer and rear AAL, Nitto Terragrapplers, weldertaco wrap around rear tube bumper, TrailWorx Fab tube front bumper
    I know these are eBay lights but I did black them out, They turned out awesome, way better than the original chrome housing.

    Iphone 002.jpg
    Iphone 013.jpg
     
    This site contains affiliate links for which the site may be compensated.
    Kavik, Feb 27, 2012
    #384
  5. Mar 18, 2012 at 5:22 PM
    #385
    ShatBag

    #385
    ShatBag New Member

    Joined:
    Mar 9, 2012
    Member:
    #74537
    Messages:
    2
    Gender:
    Male
    First Name:
    Chris
    Edinburg TX
    Vehicle:
    2012 PreRunner DoubleCab
    CAI (homemade), System/Amp to stock radio, Painted Badges. The Future... Retrofit!
    350 deg at 8 mins made my 2012 come open easily. Just remember to turn off the oven when the headlight is in there. And dont try and take out the light leveling bolts like i did lol. Now I have to re-adjust my lights...
     
    ShatBag, Mar 18, 2012
    #385
  6. Mar 18, 2012 at 5:28 PM
    #386
    easyeatlanta

    #386
    easyeatlanta Artificial Intelligence beats natural stupidity

    Joined:
    Aug 10, 2010
    Member:
    #41518
    Messages:
    1,253
    Gender:
    Male
    First Name:
    Eric
    Memphis
    Vehicle:
    14 DC Trd Off Road
    i have the same lights and you just inspired me to do this. that looks so much better
     
    This site contains affiliate links for which the site may be compensated.
    easyeatlanta, Mar 18, 2012
    #386
  7. Mar 18, 2012 at 6:51 PM
    #387
    Kavik

    #387
    Kavik Kavik

    Joined:
    Jan 30, 2012
    Member:
    #71810
    Messages:
    3,360
    Gender:
    Male
    Texas, DFW
    Vehicle:
    Not your everday 5 lug
    Lowered: 3 inch drop blocks (Beefed Taco),Satoshi Grill, Morimoto bi-xenon H1 Retrofitted headlights, Flowmaster exhaust, Blue LED interior and exterior, blue LED dome light, Anzo black LED taillights, Hifonics Brutus 1100w Mono Block, Bazooka 300w Amp, LED license plate lights. Lifited: Fat Bob's rear shocks, Fat Bob's 3" spacer and rear AAL, Nitto Terragrapplers, weldertaco wrap around rear tube bumper, TrailWorx Fab tube front bumper
    It was real easy to do just make sure to re seal them super good. I will be taking mine apart again here after a while to put proper CCFL rings in instead of the two stupid LEDs. I cant wait to make my retros!
     
    Kavik, Mar 18, 2012
    #387
  8. Mar 22, 2012 at 7:45 AM
    #388
    easyeatlanta

    #388
    easyeatlanta Artificial Intelligence beats natural stupidity

    Joined:
    Aug 10, 2010
    Member:
    #41518
    Messages:
    1,253
    Gender:
    Male
    First Name:
    Eric
    Memphis
    Vehicle:
    14 DC Trd Off Road
    yeah i bet I havent had any problem with these lights after I took the leds out so my lights actually arent sealed but never fog or hold water, very strange I definitely cant explain how that works
     
    easyeatlanta, Mar 22, 2012
    #388
  9. Apr 22, 2012 at 4:27 PM
    #389
    tired taco

    #389
    tired taco Active Member

    Joined:
    Apr 12, 2012
    Member:
    #76778
    Messages:
    27
    Gender:
    Male
    Gilbert, Az.
    Vehicle:
    06 Sport SR5 PreRunner
    I did my headlights a couple of days ago. My first mod on my truck. I think it came out nice. it was pretty easy as well, just follow steps on the thread and its all good. The only problem I had was that my lenses were oxidized. So, after doing the mod it made the oxidation look much worse.
    With a tip from another member I used Plast-X. With some elbow grease and Plast-x my lenses and my mod looks awesome.

    Pics for anyone who cares. Pics were from before I de-oxidized my lenses.

    Before...
    [​IMG]

    After..
    [​IMG]
     
    tired taco, Apr 22, 2012
    #389
  10. Apr 23, 2012 at 7:16 AM
    #390
    Kavik

    #390
    Kavik Kavik

    Joined:
    Jan 30, 2012
    Member:
    #71810
    Messages:
    3,360
    Gender:
    Male
    Texas, DFW
    Vehicle:
    Not your everday 5 lug
    Lowered: 3 inch drop blocks (Beefed Taco),Satoshi Grill, Morimoto bi-xenon H1 Retrofitted headlights, Flowmaster exhaust, Blue LED interior and exterior, blue LED dome light, Anzo black LED taillights, Hifonics Brutus 1100w Mono Block, Bazooka 300w Amp, LED license plate lights. Lifited: Fat Bob's rear shocks, Fat Bob's 3" spacer and rear AAL, Nitto Terragrapplers, weldertaco wrap around rear tube bumper, TrailWorx Fab tube front bumper
    show them after the restore!
     
    Kavik, Apr 23, 2012
    #390
  11. Apr 28, 2012 at 11:36 AM
    #391
    nobody4343

    #391
    nobody4343 Well-Known Member

    Joined:
    Mar 27, 2011
    Member:
    #53823
    Messages:
    1,037
    Gender:
    Male
    First Name:
    Jonathan
    Carlsbad, NM
    Vehicle:
    06 Trd offroad sr5
    hid headlights, black spyder jdm headlight housings, black jdm led spyder taillights, full led bulb swap, hid foglights, 3 inch pro comp lift, black out emblems, two 4 inch hid lights mounted behind the satoshi, wade vent visors, black westin nerf bars, black stubby antenna, k and n cold air intake, flowmaster delta 50 dual exhaust custom black tips, color matched satoshi grill with custom emblem
    has anyone tried blacking out the orange reflector and the inner turn signal lens
     
    nobody4343, Apr 28, 2012
    #391
  12. May 1, 2012 at 7:26 PM
    #392
    Imperial 619

    #392
    Imperial 619 Member

    Joined:
    Jul 5, 2011
    Member:
    #59345
    Messages:
    5
    Gender:
    Male
    First Name:
    Kyle
    San Diego
    Vehicle:
    08 Prerunner Off Road Rugged Trail
    Yes check the other how to bhlm thread a few links down id link you but im on my phone right now.

    On another note, just finished my headlights today and they came out a lot better then expected! Im still nervous about getting condensation inside though..
     
    Imperial 619, May 1, 2012
    #392
  13. Jun 15, 2012 at 6:01 PM
    #393
    Mj2111

    #393
    Mj2111 Well-Known Member

    Joined:
    Apr 29, 2012
    Member:
    #77883
    Messages:
    67
    Gender:
    Male
    Hawaii, Ewa Beach
    Vehicle:
    2016 Tacoma offroad 4x4
    Anyone tried krylon fusion gloss? Or just flat black? Or even tried plastic dip my friend told me try but I dont wanna waste money of I no need
     
    Mj2111, Jun 15, 2012
    #393
  14. Aug 1, 2012 at 1:03 PM
    #394
    TheWeatherman

    #394
    TheWeatherman Well-Known Member

    Joined:
    Jul 15, 2012
    Member:
    #82682
    Messages:
    280
    Gender:
    Male
    Northern Colorado, CO
    Vehicle:
    2022 TRD Pro
    I would like to know this as well... Are you guys using Krylon Fusion matte, satin, or gloss?
     
    TheWeatherman, Aug 1, 2012
    #394
  15. Aug 21, 2012 at 5:12 AM
    #395
    Plik

    #395
    Plik Ragin Cajun

    Joined:
    Aug 13, 2011
    Member:
    #61618
    Messages:
    329
    Gender:
    Male
    Houston
    Vehicle:
    '11 DCSB PreRunner TRD Sport
    Click my sig pic for build thread

    I don't know if this has been covered (didn't read the whole thread), but when we did this mod on civics back in the early 00s we would run a bead of RVT silicon sealant in the seam of the housing. Never had a problem with condensation. I don't think I would use electrical tap as the OP suggests
     
    Plik, Aug 21, 2012
    #395
  16. Aug 21, 2012 at 11:15 AM
    #396
    Kavik

    #396
    Kavik Kavik

    Joined:
    Jan 30, 2012
    Member:
    #71810
    Messages:
    3,360
    Gender:
    Male
    Texas, DFW
    Vehicle:
    Not your everday 5 lug
    Lowered: 3 inch drop blocks (Beefed Taco),Satoshi Grill, Morimoto bi-xenon H1 Retrofitted headlights, Flowmaster exhaust, Blue LED interior and exterior, blue LED dome light, Anzo black LED taillights, Hifonics Brutus 1100w Mono Block, Bazooka 300w Amp, LED license plate lights. Lifited: Fat Bob's rear shocks, Fat Bob's 3" spacer and rear AAL, Nitto Terragrapplers, weldertaco wrap around rear tube bumper, TrailWorx Fab tube front bumper
    I used krylon fusion satin black, worked like a charm.
     
    Kavik, Aug 21, 2012
    #396
  17. Aug 23, 2012 at 3:52 PM
    #397
    RJALLDAY702

    #397
    RJALLDAY702 U MAD? OH U MAD

    Joined:
    Sep 12, 2011
    Member:
    #63360
    Messages:
    12,578
    Gender:
    Male
    First Name:
    RJ
    Las Vegas
    Vehicle:
    2014 Toyota 4Runner
    6" Ruff Country DBL
    What sealant is best to use when resealing the headlights?
     
    RJALLDAY702, Aug 23, 2012
    #397
  18. Aug 23, 2012 at 3:54 PM
    #398
    Kavik

    #398
    Kavik Kavik

    Joined:
    Jan 30, 2012
    Member:
    #71810
    Messages:
    3,360
    Gender:
    Male
    Texas, DFW
    Vehicle:
    Not your everday 5 lug
    Lowered: 3 inch drop blocks (Beefed Taco),Satoshi Grill, Morimoto bi-xenon H1 Retrofitted headlights, Flowmaster exhaust, Blue LED interior and exterior, blue LED dome light, Anzo black LED taillights, Hifonics Brutus 1100w Mono Block, Bazooka 300w Amp, LED license plate lights. Lifited: Fat Bob's rear shocks, Fat Bob's 3" spacer and rear AAL, Nitto Terragrapplers, weldertaco wrap around rear tube bumper, TrailWorx Fab tube front bumper
    Go to your local automotive store and get some of their windshield sealant.
     
    Kavik, Aug 23, 2012
    #398
  19. Aug 23, 2012 at 3:59 PM
    #399
    RJALLDAY702

    #399
    RJALLDAY702 U MAD? OH U MAD

    Joined:
    Sep 12, 2011
    Member:
    #63360
    Messages:
    12,578
    Gender:
    Male
    First Name:
    RJ
    Las Vegas
    Vehicle:
    2014 Toyota 4Runner
    6" Ruff Country DBL
    Cool thanks! Are there any particular brands I should be looking out for?
     
    RJALLDAY702, Aug 23, 2012
    #399
  20. Aug 23, 2012 at 4:01 PM
    #400
    Kavik

    #400
    Kavik Kavik

    Joined:
    Jan 30, 2012
    Member:
    #71810
    Messages:
    3,360
    Gender:
    Male
    Texas, DFW
    Vehicle:
    Not your everday 5 lug
    Lowered: 3 inch drop blocks (Beefed Taco),Satoshi Grill, Morimoto bi-xenon H1 Retrofitted headlights, Flowmaster exhaust, Blue LED interior and exterior, blue LED dome light, Anzo black LED taillights, Hifonics Brutus 1100w Mono Block, Bazooka 300w Amp, LED license plate lights. Lifited: Fat Bob's rear shocks, Fat Bob's 3" spacer and rear AAL, Nitto Terragrapplers, weldertaco wrap around rear tube bumper, TrailWorx Fab tube front bumper
    Just talk to them, the stuff I bought wasn't on the shelf so you might have to ask. Mine was in a tube that required a caulk gun but you probably don't need that much.
     
    Kavik, Aug 23, 2012
    #400
Page 20 of 41

Products Discussed in

3M Wet or dry Sandpaper, 9 in. x 11", 600 Grit, Ultra Fine, 5 Sheets/Pack
$6.82
5" Hook & Loop Sanding Discs, No Holes, 600 Grit, Box of 50.
$16.95
To Top