Colorado Trading Post

$10

 

I would but I can't spend even that right now. My wife would flip shit.

 

Believe me, I understand!

 

Damn. If only it were built for an auto. Yeah, yeah just buy a new adapter plate. I know.

 

Wildernest anyone?

http://westslope.craigslist.org/pts/3232717576.html

 

I'm putting some 35" tires on the truck and am wondering if anybody here would be interested in my old 265/75/16 duratrac's. They have about 40k miles on them and are about 1/8" from the wear bar on the tire so they have just a little life left in them. I figured if somebody wanted them for off-roading I'd check here before I have the tire shop dispose of them for me on Friday. One tire was plugged just a couple of weeks ago due to a pesky nail but has been fine ever since.

Figured about $100 for all four would be fair and help me put a dent in the bill for the new 35's

 

feeler for some parts...

doug thorley long tube headers

4 pro comp 17" 7089 wheels wrapped in 285/70/17 duratracs (one interest party already)...

will be swapping out some parts by spring

 

if that was only for a 2nd gen i'd be on that!

 

BOB you should buy that transfer case !
And what wheels and tires are you going to if you are putting yours up ?

 

It should fit a standard bed 2nd gen. The shell has a large lip on it that sits inside the bedrails on mine so would accommodate a slightly narrower bed.

 

are you selling it?

can you get some measurements on the width, length and height from the rails?

 

Yeah and the Tacoma too. I'll shoot back to the house in a bit and measure it.

 

i will only i don't need it..

was going to go with the pro comp rock crawler wheels, until i just saw the max load is only 2000lbs! wtf is that shit?! looks like most their wheels are in the 2000lb range...seems weak...most our tires have load ranges >3000lbs...should still be fine, so probably going with them..4.25" backspacing should widen the stance slightly too

but looking at 285/75/16 MTRs...get some more sidewall and higher load ratings

edit: may lean toward mickey thompson classic locks...3100lbs max loads

 

Exterior dimensions 76" long x roughly 61" wide.

Height is 19.5" to the main portion of the cap, close to the cab height on my 1st gen.

The cap has wide rails so interior mounting could be:

54" wide and 72" long


I found a thread with a 2nd gen and a wildernest.

http://www.tacomaworld.com/forum/2nd-gen-tacomas/106372-camping-wheeling-pictures.html

 

76x61 would put it just inside of the outside of the rails on the 2nd gens and height would be about perfect with the cab height...

any pics of it closed? close up of the patched area?


edit: is it the same model as the guy in the 2nd gen thread you posted?

 

I can pop it up later today and get some closer inside shots.

 

it's a hard sell with the lady...

between new wheel/tire setup and a snorkel..mod money is hard to come by but i'll keep pushing it...

i'll shoot you a pm if we change our minds...if this was for sale next spring, i don't think i'd be hesitating...