What Have You Done To Your 2nd Gen Tacoma Today?

Took a cheap "Head Utility Light", cut the strap, took off the Pinch clip & drilled a hole, then removed the center screw & replaced with a longer one, ta-da! It clears no problems when closing & adjusts, 90 degree pivot, works for me...

 

nice! pretty useful.

 

Rotating the feets.
Oil change yesterday.

 

Received my snow chains I ordered the other day.

Went with Rud Grip 4x4 chains from http://tirechaindealer.com/

Practiced yesterday, got it down to 2 min per wheel

 

What paint did you use, krylon fusion?

 

Finally found one for the 2012. LeBra. $105 w/shipping. I'm one of those guys that hates gravel chips, finally an outfit got one designed for the 2012. I wanted Colgan because I think they have the softest liner, but this LeBra seems ok and just in time for winter.

 

I just installed this: http://store.winner-intl.com/the-club-personal-vault-p68.aspx

Ray

 

I think he got them off of ebay. 50/50 waterproof leds or something like that. Amazone has them too.

 

Is that a makeup brush in your center console?

 

replaced the spark plugs and checked the diff's/transfer case to see if they needed to be done as well. Front and transfer were clean, rear was a tad darker but still good.

 

barri nuts or some tack welds on the end of the bolts.

 

Did the cig/accessories auto mod so they stay on full time and took the charcoal filter out

 

Looks really good! What did u use for paint wise on the emblems? I wanna go lime green, and what did u use on the interior thanks

 

http://www.autoanything.com/lights/69A3047A0A0.aspx



If you need other sizes:
http://www.fastenal.com/web/search/...|~ ~|categoryl2:"600141 Security Fasteners"|~

 

Installed intermittent wipers.

thread here

Dropped off the custom bumper at LineX yesterday, it'll be installed next week while I'm away.

 

I fixed my retrofits, put in a new relay for my PIAA lights and got an Optima Yellowtop installed

 

Put the Taco OEM shift knob in my Subaru. Drilled out the counterbore section inside the knob to fit the Subaru's 10 mm stalk (Toyota is 8 mm).

 

I have a self contained combo one like that and a console vault. Lots of vehicle burglary in my neighborhood, it's great to have goodies stored in a safe place.

 

I rustoleum bedliner'd my bed bolts, no more rust in the winter, here's hoping. Not the perfect but works, sorry for the dark picture, not much light in the garage.

 

Bought one of Matt123's skids... it shipped today, I can't wait to put it on