*OFFICIAL* UltraGauge EM 1.2 Holiday Group Buy GB (ScanGauge Alternative)

fri

 

Took them until Monday afternoon to get me any tracking info and I ordered Sunday AM. And I'm going to guess they did not work yesterday or today....so expect something monday (maybe cause of Vets day) or Tues...

 

Mine displays the gallons left but I'm assuming by your post that it's only showing estimated gallons remaining predicated upon the burn rate or fuel flow from a full tank, etc.?

Would be handy to have "true actual" remaining in a numerical value. I guess that puts more emphasis on really dialing in the unit by calibration so as to get as close to an accurate "DTE" reading and "remaining gallons" as possible.

 

Correct. You have to manually tell it when you fill you too..

 

Yea I caught that on the initial set up details. I hit the button on the back to indicate a fill up for the first time yesterday.

You know even un-calibrated, this thing is still very close to factory settings and is really nice to have for fuel use/planning. Lovin' it so far!

 

The UG doesn't do anything other than read the ECU. The calibration is to adjust for errors induced from a variety of sources. If you make the measurements and they are good enough...than you are all set. I'm focusing on getting the calibration factor a little closer on mine...It's good, but not good enough for me.

 

I hear ya bud.

 

do our trucks use the injector cutoff setting?

 

see post #2 for final official list. PM ASAP with any corrections or if you are missing.

 

THE FOLLOWING MESSAGE HAS BEEN SENT TO ANY CONFIRMED BUYERS WHO HAVE NOT ORDERED:


You are receiving this message because you have recently signed up for the UltraGauge EM 1.2 Group Buy but have not yet ordered. The group buy closes promptly at 11:59pm PST tonight. You have less than 3.5 hours to place your order. Any orders placed after midnight tonight will NOT be counted and no discount will be earned. You may be in 1 of 2 situations below:

1. If you no longer wish to participate, no further action is necessary. Your name will be dropped from the list before submission to UltraGauge for review. No need to PM me.

2. If you HAVE PLACED AND ORDER and you believe you have received this message in error, it is because I have not received a PM from you containing your order number and qty ordered. If this is the case, it is imperative that you send me your order number ASAP. This list will be submitted early Monday morning and your name will be dropped from the list and not included. Without that order information, you will not receive a refund or discount on your order.

Please verify your order status for this Group Buy and contact me asap if any changes or updates need to be made.

Thank you for your time.

ProForce (Anthony)
Group Buy Coordinator


Joben7726 ; MySilverTaco13 ; azchick87 ; wolfgang123 ; NMW 4x4 ; HumboldtTaco707 ; Sabre ; deadmanh ; T4C0CH40S ; ULtRaMan ; ambiguous ; tntacoma ; extenzeHi ; Tacoma414 ; SkullTaco2012 ; Beeesmitty ; VTTACOMA ; Harleydad ; luisito72 ; Thesmash133 ; Mach375 ; OsideTRD ; Junya808 ; SOSHeloPilot ; oneshot808 ; tquang ; The Traveler ; 650H1 ; bizjettech ; Ramzey28

 

Ordered, thanks for the reminder. I actually was thinking I had more time to order. Glad I signed on just now. Thanks again for all your work on this.

 

so on the calibrating, can you just multiply what it reads by the difference of tire size?

so 265/75/16 to 285/75/16 is like 1.064 if i remember right?

1.064x X.Xmiles ?

e/ i think 1.064 is wrong though.

 

Placed my order and PM sent. Thanks for the reminder.

 

List updated. PMs replied too. 2 hours remaining!

 

The only thing I wish I would have done that I would suggest is to spray paint the clip black (or whatever color) too make it even less noticeable.

 

*THIS GROUP BUY IS NOW CLOSED*





ORDERING IS COMPLETE. NO FURTHER ORDERS WILL BE INCLUDED IN THIS GROUP BUY. THANKS FOR LOOKING​

 

On behalf on Ultra-Gauge and myself, I would like to thank all those who participated in this group buy. It has been a challenging few weeks for me, and I could not have done it alone. The support team at Ultra-Gauge was an incredible resource as well as those members on here who took the initiative to assist and answer questions of those who were less experienced or just did not quite understand. Many of us made mistakes with our orders, but not to worry, you certainly weren't alone and everything will be fixed.

Some of you have already received your and filled out the rebate information, but for those that have not yet, please make sure to read the directions very very closely! The $9 rebate is handled by a third party and will deny your rebate for something as simple as forgetting to date your form. Don't hesitate to ask questions if you need help. Please refrain from contacting Ultra-Gauge for support unless someone here or myself are unable to assist you first. I am still here for some support.

With Monday being a Holiday (USA) shipping may be delayed domestically and internationally. Please be patient and account for this 3 day weekend. Rebate status may also be set back a few days. With over 200 orders from TW alone, the rebate department is swamped and may take 1-3 weeks to process all your refunds.

Your $9 rebate will be credited back to your initial form of payment by the third party once all information is received by them and correctly filled out and completed.

You will all be receiving and additional $15 refund/credit directly from Ultra-Gauge. This is the discount we earned for hitting 150+ orders. This refund will also be made to your original form of payment. I was initially told that this takes place by Tuesday of this week, but with delays, this could take up to 1-3 weeks as well. Please be patient. Once you get your $15 credit back, allow 1-3 business days for your bank to process these funds as well. Then feel free to post here and let us know when the refund is complete so others can know when to expect theirs. This should happen around the same date for all of us.

If you have any other questions/comments/concerns/etc, please feel free to post them here or you can PM me. I will do my best to get back to you as soon as I can. Again, if you have a question or issue, please contact myself or reach out to the community here before contacting UG. In order for us to get our refunds in a timely manner, we need to do our best to reduce the workload that UG has to deal with in the coming days.

Thank you everyone again. Many of you were a great help. Enjoy your early Christmas gifts!!

 

has anyone done the mail in rebate yet kind of a lengthy process, i just took my test, printed and filled out all my paper work........hope it works out!!!

 

Ditto...I'm gunna review it all make sure it's perfect and scan/email it in tmrw. See how it goes...

 

What gauges are you guys putting on each page? Staying with default or customizing it. Share your custom configuration.