What Have You Done To Your 2nd Gen Tacoma Today?

As soon as Toyota warranty's the diff ill share for now, let's just say I was driving normally....

 

Put some Bridgestone DM-V1 dedicated winter tires on. amazing grip on ice and look good too.

 

Today I made and installed LED bed lights.


Spent a few hours soldering (3) 3' sections of LED lights. The LED's are flexible, waterproof and can be cut in to sections of (3) LED's or more.


I still have a 15' roll, what to make next?



The Switch, out of sight and harms way. I am going to add a black rubber cap to make it stealth.

 

Very nice. Those look bright!

 

started working on a headache rack.
not sure i like the rails, but w/ the bed coming in at the back, figured i'd keep it simple with this one.

 

The sharkfin antenna is still the highest point.

 

If that thing ever gets bent, we'll all see the cause on the evening news!

 

As normal as your sig pic?

 

I am at 80k miles on my 2010, I drive long distances on a daily basis, and ride anothe 1000 miles once a month. So maybe the failure was just riding hard on them. Finally test drove it today, and it rides smooth now. Diagnosis was pretty simple, no play in the wheels, but when the front end was jacked up, and I spun each wheel, driver side had a significantly louder metal dragging noise. Plus I had a humming noise while driving.

 

Hahaha. No comment

 

Where did you get them from and how hard is it to install? Did you just use 3M double sided tape to mount?

 

^^ same question.. I am wanting to do this next. I am thinking about getting the ones from Oznium.com

 

Changed tranny fluid, motor oil, and rear diff today...diff with redline

$28 75W-90 Synthetic Gear Lube - 1 Quart (Pack of 2)

75W-90 and the tranny with redline MT90. I could tell a difference in the shifting immediately. Motor oil with M1 extended performance and a wix filter.

Much happier truck now!!

 

New Bulbs

 

Went from stock


Last week i got some MB TKO 16" rims with Yokohama geolander a/ts tires.




Today partal debadge and badge black out.

 

been wanting to mount my LED flood/spot light for a while... from DDM. finally knocked it out...
wiring it up tomorrow... with some OTRATTW switches, one for bed lights, one for reverse light, and some other switches for stuff i dont have yet, hahaha

gotta wire up my blue sea fuse box under the dash... give it some power, then run all the wiring around my truck... soooo not motivated to get it done

 

Why use photoshop when you have a foot

 

^^^Hahahah.

I busted one of my fogs, lost a D Ring shackle and I dont know where my exhaust went.

 

headache rack looks good, what's the TSS package?