Colorado B.S. Thread

I'm sure you do! 70's Orange shag with cocaine and southern comfort vomit won't look quite as sharp in the back of the truck though.

 

Some pics he sent

 

ridden hard and put up wet?

 

Just looks dirty. Mine proll looks like that if I took it out.

 

Thats what he said.

He says the contacts need to be replaced or wire brushed?

 

hey! It's classy carpet.... red with stains of jack daniels.

 

I'd still hook it up and see if it works before purchase.

 

It doesnt look to bad, offer the $175 and see what he says.
As for syn line, tat stuff will cost ALOT for the good stuff, it may save 20 or so pounds but can be up to $600 for 100'. I have been looking at it to put on my warn m8000 and I only want to good stuff, so there you go on syn line.

 

will do

 

Took my front skid off today cause some one said it will help to give room for when I do my front diff oil change tomorrow. Its well loved.

 

If you want a warn syn line they can be found around $600 and go up from there. But smitty built and Westin lines are fine for $150-$300. Warn you just pay for the name. I use my winch all the time and the smitty built stuff works great. Like I said I use mine wheeling and for hauling trees.

 

They look better than the ones I took off my 07. I want some bud builds for my runner though.

 

So I orderd some LEDs from oznium on friday night and I used the USPS shipping method, got them today cause they ship from some where in Colorado, Im going to see about wireing all 5 cup holders with the orange LEDs for the hell of it, and try to put them on the dimmer every thing is conected to so I can tur them down. So far they look great.

 

That will be cool. Ill be waiting for pics on that.

 

I wasnt thinking of warn, I was thinking of the Master pull syn line. I need to find something in the next few months and also change out my rollers from metal to delrin (its like plastic but stonger).

 

http://www.masterpull.com/item/XD08100/1/
This is what I was thinking of when I talked about syn line.

 

I was reading up on that a few months ago. But until I damage mine ill leave it be. I want a Detroit locker and super charger so saving my mod bug for when I need to tell the wife I bought that stuff haha

 

Yeah I hear you on that. I have a list of stuff and prices for what I want and Im just going down the list 1 by 1 as I get the money.

 

For sure. I want the super charger but it keeps getting pushed back. Detroit and skids will be first.

 

With your bumper you could get a nice AL Hawse fair lead and can the roller fairlead. From the looks of the pics I would make sure it works. He should just be able to throw it on a battery and test it real quick. It might be good to research regreasing it. I might explore this with you as mine is noisy. $175 would be the right price if he takes it. Maybe the middle at $200

The stock XRC8 is 18.5lbs. I want to say that is 94ft. My syn line is 100ft. and weighs 3.5lbs. Not a huge weight saver. Look at the cable and see if it is worn at all. If you want I have brand new steel sitting in the garage.

You would be amazed at how 15lbs. hanging that far out on the end of the truck can rake it.

No big deal. Depending on where you want to mount the control box you might want to get a new set of cables that are longer. Or buy them for me and you can have my nice "newer" ones. I want to move my control box under the hood when I get my in cab winch switch.

I am running Viking Syn Line 3/8" - 100ft. with a safety thimble. Pulled a couple of times with it now and it has been great. Including snow drift recoil pulls. I have Deralin rollers on. They have been awesome so far.

You don't want Deralin rollers unless you are switching to syn line too. Then it is a must.