Installing 2012 stock radio in a pre-2012

woah the engine start button is sweet! how did u do that

 

Search push start on here...the thread should pop up (my bad on my phone)

 

I wonder if these are the pins you need:

http://www.bmotorsports.com/shop/product_info.php/cPath/109_110/products_id/1567


I used these same ones on my Heated Mirrors mod, and they worked perfectly. Beats paying $6/each for the pigtails at the dealer.

 

Not sure but I will look into it once I get the plug in

 

ordered 1 more plug and trying to get the wiring for the usb port (ive had the usb port for months)
if i cant get the wiring directly from toyota, i will be making it on my own...shouldnt be hard at all

 

When I emailed Toyota regarding the USB port this is what I got: "It looks like you would need 2 wiring harnesses. The first and most likely the main one being 82616-04151 and then possibly also part number 82163-04080. These parts are special order only and would take a few weeks for it to come in from Toyota."

 

Ahh I see...well still shouldn't be hard...I have 1 plug I needed still waiting for another plug

 

Where did you get the plugs? And pins?

 

I got the plugs straight from Toyota...$5-6 each (I get wholesale discount)

And I bought 1 pin which was expensive with the wire so I'm going to look for them at this local electronics store tomorrow

 

Can you post pictures and part numbers?

 

The one marked r17 is one I got today I'm waiting on the plug next to it (28 pin R15)
And the bottom one marked USB I had laying around...
Ill post pics of the part numbers tomorrow

 

Ahh ok. Different plug than the one I need for the Entune USB.

 

Yup, you need that E16 plug with like 4 or 8 pins correct?

 

Yup

 

Ya I tried getting it yesterday but my bud says that the part number is non-exsistance

 

Any luck on the pins for R15? The body harness I bought on ebay didn't include the correct sized pins I need.

 

nope...i ordered the wrong type of pins for it...theres this wrecked tacoma near by that i hope to check out tomorrow or saturday since the pins are the same to the old plugs...

i could cut my stock stuff but rather not because incase i dont like the unit once install...or decide to go a different route

 

Found a antenna adaptor that works so now all I need is The wire pins and this radio will be up and running with backup cam and USB port



Sorry for the crappy pic

 

Where did you find that connector?

Still trying to source those pins too.

 

knine00 sent me a link about 3 days ago...turns out the supplier is in my area (los Angeles) and ordered one from ebay.

i ordered one from china 2 weeks ago and its still on the way... so i got impatient and ordered one from that ebay supplier and it works

http://www.ebay.com/itm/221138813932?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

if you[SIZE=2]d like, once i re[SIZE=2]c[SIZE=2]eive the [SIZE=2]other one i can send it to you (ill check it here b4 shipping)[/SIZE][/SIZE][/SIZE][/SIZE]