3.5-3.75" backspaced wheels

$100 for a pair.

 

I agree, but I have not had any problems with my 1.25" wheel spacers. I saw a pic of 16x10 rims with spacers and it was pretty beastly

 

What size tires?

 

I have 265-70-16

 

I thought about wheel spacers but I have a feeling for some reason that they just arent that good - I was thinking more critical parts to come loose under heavy stress and they also put more strain on the wheel bearings. Do you agree with this, and if so, is it significant?

 

I'm wondering if I can get some help. Have a 2011 double cab long bed Tacoma stock, and I want to put these rockcrusher 887 on with cooper STT 265/70R17 on. Wondering if I will have any rub on the calipers or undercarriage without a lift? Also, what size back spacing I should get? Thanks in advance!

 

Do you have the rim width?

 

My stock rim is 17x7.5, I would like to put a 17x9 raceline rim on.

 

Also, I guess the rockcrusher 887 wheels come in 17x9 with a 5.0 back spacing. My stock rims are 17x7.5 with a 3.75 back spacing. Just wondering if I will get any rubbing without a lift? Thanks

 

I ran a procomp 16x8 with 3.75 bs and it rubbed like hell. (stock) With a 9 inch width your probably looking aroud a 4.5 mabey a 4 inch bs with minimal fender trimming.

 

Thanks, do you think a leveling kit would be enough lift for no rubbing?

 

I have a set of pro comp steel wheels that are 16" and they dont rub. they only have a backspace of 4 though

 

Just look up blisten 5100's adjustable front shocks go from .85 to 2.5 inch of lift. Afforadable and worth it.

 

I have walker Evans bead locks with 3.75 inch backspacing. Her is a couple of pics of how it looks. Running 295/70/17 toyo open country m/t

 

ya those are bada$$

 

How much trimming did you have to do upfront?

 

A lot. Went up to 305s after that. Had to hammer the pinch weld flat with a BFH. After that, it was good though