scalfee90's 1st Gen Build

A 20mm amo can would do the trick!

 

I only have about 5 inches of space to work with it would have to be real creative!

 

This is one of my favorite first gen builds!! I love the bumpers! I also built mine and im in the process of building a new one with diamond plate. Im glad i saw yours to get ideas.

Old pic but i just made the bumper in this one.




This is my new bumper im building and im going to diamond plate it! Yours look freaken awesome!!

 

Looks like a good ole lincoln i see??

 

Looks good! I like the lights mounted on top!

 

Clutch.....baha

 

Damn you!!! Lol

 

Well I'm looking at getting a clutch! I burnt it up and probably scorched.... the whole thing! All I got in store for future is restoring my front end, radiator support, glassworks hood, new headlights, new corners, lots of lighting, winch

 

Are those "194" leds? I Bought a set of 8 of those but mine are blue that I wanted to put into my dash but I haven't had time to take apart my dash yet and I also don't want to rip it all apart if the bulbs are the wrong size because I saw a picture of someones dash online and they weren't 194s they were much smaller one bulb leds. Do you have any pictures of your dash cluster when it was out ? (my trucks an 03 sr5 tacoma by the way) thanks!

 

I don't have one of the cluster out, so I found one! My buddy travis9287 has an 03 and it also used 194s there should be 6 194 bulbs, 4 illuminate the cluster, 2 for the blinker indicators and then the rest are a 74 type bulb. The A/C climate controls are tricky you may have to do some custom work in their! Most people modify T1.5x bulbs for it.

Heres a link showing what you gotta do for the climate controls.
http://www.customtacos.com/forum/showthread.php?t=118109

 

WANT!

I seen this while shopping for a new radiator support. I think I might get some?

 

just now am seeing your link to the climate control bulbs! THANKS so much!

 

No prob man

 

Well I'm in the process of putting in a Marlin Crawler 1,200lbs clutch. I'll have updates posted soon.

 

Finally got the clutch installed about a week ago! Got a Marlin Crawler 1200 and I'm loving it! On the test drive I ran into some bad luck for sure! I got something in the fan and slashed my radiator. I ran it a little hot but got it home and soldered the radiator up and its good to go for now!






Also another thing I did was black the hood which basically looks like spray on bed liner and did a subtle angry eye look.



Here's a few pictures of me and travis9287 on a joy ride.






My next plan is to put a radiator, radiator support, new headlights, and corners up front so I can be new again! Updates still to come!

 

12v power outlet under the bumper and made some fender liners

 

Installed an electric fan with thermostatic control today! I wired it to the cigarette lighter positive which goes to a relay and cuts on the thermostat and it runs pretty well!