Long Travel BS Thread

Didn't read the rest of your post. No you cannot run the Coliovers with stock Lca/UCA

 

Just look up the part numbers on chaosfab.com and see if they match for the two different vehicles.

No, you won't be able to run an 8'' coil over on your stock LCA's.

 

A member on here(relik) I know is running bfg treadwrights. He had an issue with two that couldn't get to balance unless using a shit load of weights. Had both replace by them though.....he doesn't come on here much anymore so I dont know how they held up.

 

Didnt think so, thanks

 

Sure thing Dougie, and just run tundra shafts from auto zone with lifetime warranty. U just grind off lip on upper cv where stock boot mounts and use a 930 boot/clamp which will gain u just about full travel like a 2wd. I'm strapped so my uca uni won't bind metal to metal. Cv's aren't limiting my travel

Edit* camburg, total chaos are common. Solo and a few others are out there too....

 

are you thinking what i think your thinking?
i remember you saying that the LT guys are a bit odd.

 

I hope he is

 

so do i, but then he'd have LT and 4x4 and i'd just have LT.

 

The voice of reason haha, thanks Cory, I'm taking notes for a project possibly.....

Damn I'm lovin' your truck dude....

Ya never know......


I've got 2 sets of 2nd gen stock UCA's which in itself isn't remarkable at all, but !! I did notice that they're almost identical to 1st gens where they mount on the pivot bolt but the 2nd gens are deeper (larger?) with the upper ball joint connection point is the same but it is more outwardly positioned (towards spindle) so theoretically if they fit should provide more travel at full droop wouldn't you say ?? (just a guess)

 

I suppose, but it's gonna throw off the geometry of the front end big time!

 

Thats my speciallty bro' you should know that !! I'm still waiting for the SUA guys to track down one of those 1 ton S-10's & retro one of those leafpacks on to a Tacoma, it would be an unbelievable ride, factory 9-leaf SUA, but they stuck on springs that start with an A or a D.. haha

 

the 05+ nissan frontier guys use stock titan suspension as long travel set ups, just shock hoops and lose the coil bucket....

 

Yeah, Ive seen frontiers with titan arm swaps.

Oh and,

 

the titan and frontiers use the same frame

 

http://jalopnik.com/5967137/you-can...dium=recirculation&utm_campaign=recirculation

 

https://www.youtube.com/watch?v=uQ74qfqXfL8

 

looking awesome anthony!

 

Looking good!

Finishing the A-arms first? Then going onto the spindles?

 

Lower, spindle, then upper