1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Idaho BS thread in the PNW

Discussion in 'North West' started by Jensonbt, Aug 28, 2011.

  1. Dec 10, 2012 at 3:08 PM
    BradyT88

    BradyT88 Well-Known Member

    Joined:
    Nov 3, 2011
    Member:
    #66419
    Messages:
    36,723
    My dad works for a company that runs a Napa store on the side so he gets a good discount there... haha. Although half the time carquest can still beat out his discounted price.
     
  2. Dec 10, 2012 at 3:16 PM
    MTgirl

    MTgirl too many frogs, not enough princes... Moderator

    Joined:
    Sep 29, 2009
    Member:
    #23531
    Messages:
    69,330
    Gender:
    Female
    First Name:
    Weesa
    Bob's secret mod lair
    Vehicle:
    Then: 12 T4R SR5 Now: 99 - 3.4L SR5 4WD
    Wheeler's/Alcan 5-pack leaf springs, OME 881's, de-badged, Jungle Fender Flares, Herculined bed, HomerTaco grille, Anzo headlights, clear corners,
    Same. O'Reilly's is usually more helpful and patient and I would have gone there but they didn't have the plugs in stock.
    :eek: that's pretty bad.
     
  3. Dec 10, 2012 at 3:20 PM
    Twistedfreedom

    Twistedfreedom welcome to the incredibuild

    Joined:
    Sep 12, 2011
    Member:
    #63386
    Messages:
    8,821
    Gender:
    Male
    First Name:
    Adam
    Seattle
    Vehicle:
    in progress
    modded the F*ck out
    Brady don't you get military discount at napa? I usually order from Rockauto they typically have the best prices
     
  4. Dec 10, 2012 at 3:21 PM
    rctoy

    rctoy It's about to get real!!!

    Joined:
    Feb 13, 2012
    Member:
    #72789
    Messages:
    6,981
    Gender:
    Male
    First Name:
    konstantenos
    Pocatello Idaho
    Vehicle:
    First gen 4door monster in progress
    TRD super charger, URD fuel mods and 2.1 super grip pully, Headers, 2.5" glass pack, Dana 60 front 4 linked, 14bolt rears on chev 63's, 5.38 gears, ARB locker in the front, PSC full hydraulic steering, 18" SAW 2.5" triple rate coils overs, FOA 2.5 air bumps, B&M launch controls, B&M trans cooler, 4 alpine 6X8 type R's amped, Red led rock lights, CBI front and rear bumpers (my design) CBI sliders, 4 riggid dualys front 2 in the rear, custom track bar, ARB snorkle, warn VR8000 winch, Viair 480c twin compressers..
    I get a shop discount at all of those places but O'Reilly's is in moab and i get that discount there too. :D
     
  5. Dec 10, 2012 at 3:27 PM
    BradyT88

    BradyT88 Well-Known Member

    Joined:
    Nov 3, 2011
    Member:
    #66419
    Messages:
    36,723
    Never tried. Don't shop at any of those places very often. My dad's discount is 5% over cost. So whatever Napa paid for the part, he gets it for 5% over that. Should be a killer deal I would think, but I guess not.
     
  6. Dec 10, 2012 at 3:48 PM
    Blackdawg

    Blackdawg Dr. Frankenstein

    Joined:
    Dec 31, 2010
    Member:
    #48500
    Messages:
    81,619
    Gender:
    Male
    First Name:
    Monte
    Wyoming/St. Louis
    Vehicle:
    The Trifecta of Taco's
    ALL OF THEM!...Then some more.
    I go Orielys too. Napa is too expensive usually.
     
  7. Dec 10, 2012 at 3:54 PM
    rctoy

    rctoy It's about to get real!!!

    Joined:
    Feb 13, 2012
    Member:
    #72789
    Messages:
    6,981
    Gender:
    Male
    First Name:
    konstantenos
    Pocatello Idaho
    Vehicle:
    First gen 4door monster in progress
    TRD super charger, URD fuel mods and 2.1 super grip pully, Headers, 2.5" glass pack, Dana 60 front 4 linked, 14bolt rears on chev 63's, 5.38 gears, ARB locker in the front, PSC full hydraulic steering, 18" SAW 2.5" triple rate coils overs, FOA 2.5 air bumps, B&M launch controls, B&M trans cooler, 4 alpine 6X8 type R's amped, Red led rock lights, CBI front and rear bumpers (my design) CBI sliders, 4 riggid dualys front 2 in the rear, custom track bar, ARB snorkle, warn VR8000 winch, Viair 480c twin compressers..
    Point i was making is ill probably be able to hook who ever goes to moab up on any parts they buy.
     
  8. Dec 10, 2012 at 5:01 PM
    Box Rocket

    Box Rocket Well-Known Member

    Joined:
    Mar 1, 2010
    Member:
    #32389
    Messages:
    7,184
    Gender:
    Male
    First Name:
    Adam
    Syracuse, Utah
    Vehicle:
    1995 FZJ80 Land Cruiser
    3xLocked, lifted, well used
    Hey Idaho peeps. I hope you don't mind me crashing the thread. I just sent a message to Ben and figured I'd throw it out here for the rest of you too. If anyone is interested in a bedrack and would like to save a little on shipping, I can possibly help out a little. My parents are in Idaho Falls and we're up there quite a bit (will be up there the week between Christmas and New Years). I could probably get a rack or two built and deliver them as far as IF when I come up there.

    Just throwing it out there in case anyone is interested. Happy to help out my northern neighbors. ;)
     
  9. Dec 10, 2012 at 5:24 PM
    BradyT88

    BradyT88 Well-Known Member

    Joined:
    Nov 3, 2011
    Member:
    #66419
    Messages:
    36,723
    Way to tempt Ben even more! haha:D
     
  10. Dec 10, 2012 at 6:02 PM
    Mudsaucecoma

    Mudsaucecoma Marks fucking mechanic

    Joined:
    Nov 26, 2012
    Member:
    #91902
    Messages:
    759
    Gender:
    Male
    First Name:
    Andy
    boise, idaho
    Vehicle:
    06 tacoma trd off road dcsb
    265/75r16 cooper discoverer st maxx ome 3" with 885 coils w/ an aal anytime locker mod sway bar delete Storm trooper mods custom hybrid sliders w/ kickout BHLM uniden 520xlpro w/ 4' firestck firewire and a B.A.M.F antenna mount
    I had literally a few minutes between customers this morning and checked out my exhaust and the noise is only in reverse with my foot on the brake or when I an turning out of my drive way which now makes me believe t hat I tore one of my motor mounts. I'll have to look later this week.
     
  11. Dec 10, 2012 at 6:05 PM
    BradyT88

    BradyT88 Well-Known Member

    Joined:
    Nov 3, 2011
    Member:
    #66419
    Messages:
    36,723
    damn man! You guys didn't hit anything hard did you, like jumping it or something? Hopefully you didn't damage the frame...
     
  12. Dec 10, 2012 at 6:24 PM
    Mudsaucecoma

    Mudsaucecoma Marks fucking mechanic

    Joined:
    Nov 26, 2012
    Member:
    #91902
    Messages:
    759
    Gender:
    Male
    First Name:
    Andy
    boise, idaho
    Vehicle:
    06 tacoma trd off road dcsb
    265/75r16 cooper discoverer st maxx ome 3" with 885 coils w/ an aal anytime locker mod sway bar delete Storm trooper mods custom hybrid sliders w/ kickout BHLM uniden 520xlpro w/ 4' firestck firewire and a B.A.M.F antenna mount
    We did go muddling In the river bed after being on the atv trail and when I was in the river bed is when I broke my 7 pin trailer harness plug and mount. I hit some buried river boulders that we're in the deep mud pretty hard when I broke the trailer harness. I think I did It there. But my rig does have 126 k on it... and I think 115k of it was commuting. Rear springs are sagging a bit... I just noticed that today surveying the damage this Moring.
     
  13. Dec 10, 2012 at 6:26 PM
    bulhas

    bulhas the habs fan

    Joined:
    Dec 17, 2010
    Member:
    #47857
    Messages:
    4,940
    Gender:
    Male
    First Name:
    Joe
    Edmonton, Alberta
    Vehicle:
    1997 Rexus
    LS Swap 500 hp......
    guys I found the middle of no where .......

    search sagimeo lake, ontario ....... thats where I am and i didnt bring any smokes.....
     
  14. Dec 10, 2012 at 6:32 PM
    BradyT88

    BradyT88 Well-Known Member

    Joined:
    Nov 3, 2011
    Member:
    #66419
    Messages:
    36,723
    Well you can check your frame where the motor mounts attach. 05's were plagued by this so they upgraded the frame for 06's but found it wasn't enough so 07's got another upgrade that seemed to fix the issue. Probably didn't damage it, but it is a possibility.

    This is from an 05.
    DSC07047_zpse0560d9e_9f33a1d6017497f14e0d7155c447ee2dff0e89e0.jpg
     
  15. Dec 10, 2012 at 6:35 PM
    Blackdawg

    Blackdawg Dr. Frankenstein

    Joined:
    Dec 31, 2010
    Member:
    #48500
    Messages:
    81,619
    Gender:
    Male
    First Name:
    Monte
    Wyoming/St. Louis
    Vehicle:
    The Trifecta of Taco's
    ALL OF THEM!...Then some more.
    :wave:

    Welcome to the best BS thread! Hope you pop in more.

    Ill take one! :p jk haha
     
  16. Dec 10, 2012 at 6:37 PM
    rctoy

    rctoy It's about to get real!!!

    Joined:
    Feb 13, 2012
    Member:
    #72789
    Messages:
    6,981
    Gender:
    Male
    First Name:
    konstantenos
    Pocatello Idaho
    Vehicle:
    First gen 4door monster in progress
    TRD super charger, URD fuel mods and 2.1 super grip pully, Headers, 2.5" glass pack, Dana 60 front 4 linked, 14bolt rears on chev 63's, 5.38 gears, ARB locker in the front, PSC full hydraulic steering, 18" SAW 2.5" triple rate coils overs, FOA 2.5 air bumps, B&M launch controls, B&M trans cooler, 4 alpine 6X8 type R's amped, Red led rock lights, CBI front and rear bumpers (my design) CBI sliders, 4 riggid dualys front 2 in the rear, custom track bar, ARB snorkle, warn VR8000 winch, Viair 480c twin compressers..
    lol i just remember both my motor mounts are broken.. gonna build my own bomb proof ones. and as far as frame goes well im glad i own a fist gen:D
     
  17. Dec 10, 2012 at 6:40 PM
    Blackdawg

    Blackdawg Dr. Frankenstein

    Joined:
    Dec 31, 2010
    Member:
    #48500
    Messages:
    81,619
    Gender:
    Male
    First Name:
    Monte
    Wyoming/St. Louis
    Vehicle:
    The Trifecta of Taco's
    ALL OF THEM!...Then some more.
    :eek:

    That doesn't sound safe haha I have some bomb proof ones I need to install as well as my TG tranny mount.
     
  18. Dec 10, 2012 at 6:42 PM
    bulhas

    bulhas the habs fan

    Joined:
    Dec 17, 2010
    Member:
    #47857
    Messages:
    4,940
    Gender:
    Male
    First Name:
    Joe
    Edmonton, Alberta
    Vehicle:
    1997 Rexus
    LS Swap 500 hp......
    nothing is cold anymore unless its -66.....
     
  19. Dec 10, 2012 at 6:45 PM
    rctoy

    rctoy It's about to get real!!!

    Joined:
    Feb 13, 2012
    Member:
    #72789
    Messages:
    6,981
    Gender:
    Male
    First Name:
    konstantenos
    Pocatello Idaho
    Vehicle:
    First gen 4door monster in progress
    TRD super charger, URD fuel mods and 2.1 super grip pully, Headers, 2.5" glass pack, Dana 60 front 4 linked, 14bolt rears on chev 63's, 5.38 gears, ARB locker in the front, PSC full hydraulic steering, 18" SAW 2.5" triple rate coils overs, FOA 2.5 air bumps, B&M launch controls, B&M trans cooler, 4 alpine 6X8 type R's amped, Red led rock lights, CBI front and rear bumpers (my design) CBI sliders, 4 riggid dualys front 2 in the rear, custom track bar, ARB snorkle, warn VR8000 winch, Viair 480c twin compressers..
    yeah i looked into buying some but for the 100 bones they want i could fab 3 sets. so i just need to get to it.. i have 4 pairs of factory mounts gotta change them before this next meet which really isn't much of a meet but what ev. as far as trail gear goes well i wont buy anything from them again just cuz everything ive bought from them so far was pulled off and replaced with marlin or allpro stuff.
     
  20. Dec 10, 2012 at 6:51 PM
    Blackdawg

    Blackdawg Dr. Frankenstein

    Joined:
    Dec 31, 2010
    Member:
    #48500
    Messages:
    81,619
    Gender:
    Male
    First Name:
    Monte
    Wyoming/St. Louis
    Vehicle:
    The Trifecta of Taco's
    ALL OF THEM!...Then some more.
    The tranny mount is just rebranded. Same from all the stores. I got all three for 180 plus some lugs and something else. Idk if ill like solid mounts or not. Will find out haha
     

Products Discussed in

To Top