Blitzpro Hawk 21S LED Light Bar Group Buy

I agree also so I am going to do the next best thing. a 15D in the middle of 2 6D's. The best part is I will be able to angle the 6D's outward alittle and give a bigger spread and 8210 lumens. Doing the same setup on a buddies cherokee also.

 

Flood of orders came through...must be the Christmas rush. Most orders shipping out first thing tomorrow morning! Backordered items will be shipped soon! Thank you all!

 

love mine

 

Yea I got lost...

Sun went down so fast!


Using Magneti to adjust my bypasses! Still have to fix my fire extinguisher mount...

 

Okay, so I'm planning on getting some of the 15S ones to mount on my swing away, but I'll need to find someone to make some tabs to weld onto my swing away. Can I use the side mounts without the leg part and just bolt it directly to the bar? How far forward would I need the hole of the mount to go and exactly how wide would I need to place the mounts apart? Also what size nuts and bolts do the side mounts on the bars run? Looking at the pictures I'm having a hard time seeing how the side mounts go onto the bars. Does the head of the bolt just slide perfectly in?

 

Yes you can use the provided bolts to slide them into the side of the light bar and use your own mount. The head of the bolt slides into the light and the threads stick out. You can drill hole into your swing away and use the provided side mounts. Is there is a reason why you want to weld tabs? The 15S uses M10 hardware. You can reference our tube mount kit to get a better idea.

 

If I remember correctly, the place I want to mount it is a rectangular tube. I rather not have to drill through both sides of that and run the risk of rusting the tube inside out.

M10... do you think a 3/8" diameter bolt's head will work? Or will it be too small? I have a bunch of tamper proof 3/8" nuts.

 

Sounds like just a 1" piece of angle iron with a hole drilled in it. Actually 1.5 would probably be better. Super simple. Could DIY.

 

Yeah that's a good idea. I just need to learn to weld

 

did you guys with 2nd gens find the 21" light bar to be outshined by the stock high beams?

 

I think I should go up to fun Wyoming for my welding needs

 

It's really easy man. Mig anyways is pretty strait forward. If you have good steady hands you'll be good at it haha the part that takes practice is setting the wire speed and amperage.

 

Come on up man

You should come to the WY meet this next summer!

 

hmm sounds doable next summer
maybe Ill stay up there and use your facilities

 

Very well could be an option. Keep your eyes peeled for a meet thread in the spring

 

I will lol Im about an hour and half from cheyenne, not sure where your at but I could use a little road trip

 

Total opposite side of the state where the cool mountains are

I'm way up in the basin outside of Yellowstone.

 

Ooooooooo....... Ill fly there? lol

 

Could I guess haha into cody. But it's like a 8-9 drive from Cheyenne..so come on! was 14 hours to Moab for me haha