New England B.S. Thread

Do you think the exhaust from the double cab short bed would fit an access cab?

 

Yes

 

Alex what are looked for aside job with Miguel

 

Hey Jason did you regear for your 305 tires ?

 

Molly doesn't count. Who are you kidding you wear shorts to your shins.

 

Nope. But doesn't the sport model already have higher gearing than the other models?

 

In his defense, he just said not too short, not too long. He never specified what criteria he was measuring against

 

I thought it had that same gearing, just a mechanical limited slip for your year. Pretty sure you have the same gearing as my SR5. Not sure about the TRD Off Roads but I believe they are geared the same as well, just a different sized differential in the rear.

 

Well I know on the first gens, you can decode the door sticker to get the gearing. I tried it with mine, and it said I had 4:56 gearing. Might not be accurate lol

 

I'm not sure . I was just curious . I don't think I would be able to go that big without beating and cutting my fenders .

 

4.56 doesn't sound right, 3.73 is ringing a bell as stock gearing.

Edit: I searched and found a few threads saying the same thing. V6's get 3.73, 4 bangers get 4.10 gearing.

 

I had to trim a lot from the mudflaps. I would have taken them off, but there is a line in the paint making it obvious they used to be there. I trimed a little off of the fender flare, not really noticeable unless you're looking for it. And I had the body mount trimmed a little, helps when making corners over bumps.

 

I will trade you for my stock one

 

Correct. V6's are 3.73's and 4cyl's are 4:10's.

You get more power from the skewp so it feels like lower gearing....

 

I think the guide I used was for the older Toyota trucks. I don't remember if this was the one I used.

http://www.off-road.com/trucks-4x4/tech/toyota-differential-identification-18588.html

 

That whole article references the old Toyota 8" axle, yours has an 8.4". That would explain why the decoding of your VIN wasn't working for you though.

 

I have an 8" diff.. E locker FTMFW. Although the 8.4" is a much stronger diff.

 

Lol I know right? You need to learn to use your phone a little better Billy...

 

Lol billy, you start drinking early today???