New England B.S. Thread

x2

 

That looks awesome, so much better than chrome

 

Wish i could be in the right spot at the right time for an overhead compass/temp console!

 

That's exactly the set up I eventually want to do. Le t me know how it works out.

 

Installation-wise, it looks great! You can't tell the truck didn't come with it. I'm just having some issues with my wiring at the moment but everything is installed, the heater elements just don't get hot yet

 

Maybe someone is in the right place at the right time for this. I think it deserves a new home since i decided i don't like it, ill let it go pretty cheap considering i payed like $70 for it i painted it and the paint job sucks, it really needs to be re painted and in not doing it again because it takes forever to tape off the letters, make me an offer if you want it

 

Anybody feel like doing me a favor and take a picture of your driver side lca bushing the one closet to the door . Just a straight shot looking in from the wheel .

 

uhoh...

 

I was just running out to my truck anyways. They washed out a little bit with the flash.

 

any post like this isnt good...

 

thanks . if you look straight at it. not at a angle like your picture . does it look centered and straight or does it sit at a angle in the frame bracket ?
mines at a angle which im guessing its worn out .

 

ya its not that big of a deal. i almost have a complete new front end at this point . its only money and time in the garage .

 

it may be that way because of the front lift... the higher the front the more of an angle on the LCA and would prob cause it to appear as though it is cocked... jack that tire up and see if it becomes straight again as you compress it.

 

ya thats not really true . if the bushing is in good condition it shouldnt be cocked at all no matter the lift .

 

hmm.. thats kind of a bitch to change isnt it?

 

5 bolts less then a hour

 

thats not too bad!

 

Here you go John gave me a chance to try the new camera.

 

new camera works pretty good now you just have to remember to bring it wheeling . thanks ill go look at mine on my next break and compare .

 

The bushing itself is equal all the way across.