Will 295/70/17 fit?

I have a 3" pro comp lift with stock 17's wondering if 295/70/17 will fit the stock rims? Thanks

 

I have 295/17/70s on a 3" revtec lift. I don't have the stock rims. The specs for my rims are:

• 17x8, 6 on 5.5 Bolt Pattern
• Backspace = 4.5 in.
• Max Load = 2200lbs
• Finish = HD Chrome
• Hub Centric = No
• Offset = 0mm

Not sure what the stock specs are.



The tires stick out maybe 1.5 inches beyond the fenders. I don't have problems rubbing 98% of the time. At full lock on the steering wheel AND going over a bump, I rub.


They rub on the frame a little too. It's pretty minimal though.



Hope that helps!

 

Op just get the Spidertrax 1.25 wheel spacers and you'll be fine

 

What size wheel does the manufacturer recommend for that size?
Also a possibility of rubbing on the UCAs.

 

Negative Juan, those only make the problem worse. That's the reason why I was rubbing out at gorman...1.25 spacers.

 

He's running stock rims with that size it will rub the uppers unless he has aftermarket uppers he won't have that problem

 

thanks for the input! it should only rub uppers when turned all the way left or right though right? not at all times?

 

found these demensions, sounds about right think ill be good?Originally Posted by Coastalboy
whats the specs of the stock 17" sport wheel .??? 17x??? and offset ???
Holy old thread....

The 17's are 7.5" wide, and +30 offset. That would make them around 5.5" BS

 

finally got the tires to fit, had to go with 1 1/4 spider trax wheel spacers and they clear with plenty of room between uca, a little rubbing but nothing a sawzall wont fix!