The RECTIFIED PreRunner Build

You're making me REALLY want some of those xB halos!

Truck is lookin' great

 

they are a pretty damn cool upgrade man, thanks

 

Stefen do plan on doing the install yourself on the spindles?

 

Hell. No. haha ill gather some experienced players to help me out

 

Hahah I learned the hard way today! Its a good idea, but if I can get help I could help you if you come install them in Phoenix.

 

Sounds good man, you got em installed? and yea ill most likely head to phx for that

 

Haha no. Took it all apart and couldnt figure out how to disconnect the spindle from the UCA and remove the rotor. It was bad. We almost couldnt get my tie rod back on, but managed to get it on. It was a bitch! So we put it back together and now I have my 5100's set to 0 instead of 1.75. I would suggest doing it with someone who has the experience. I would say we could try it a show low, but probably not a good idea.

 

How did you mount them? Epoxy?

 

what do you think about your ALL PRO 1.25 spacers in the front? have you had any issues. i was gonna pick up a set. my 285/70/17's are grinding with. my 2.5 inch lift. i was also looking into ADD a leaf springs.

I've heard somtimes they tend to crack for cheaper ones. but ALL Pro is know for their quality products.

 

Hey man. Bring em to phx and we can do them when you pick up your skewp!!

 

Still can't get over how the front bumper completely changed the entire look and stance of your truck...I may, yet again, have to copy you when it comes to bumpers

 

Yep, maybe like a small 4lb sledge or pickle fork...maybe a combination of the two.

 

These new rings are thicker than the others so even being 100mm, they didnt fit over the gattling gun shroud like before. i had to use a combo of 3M adhesive and superglue haha. it fits right to the outter rim of the shroud.

Get them! ive had no problems with them, they fit nice a secure to the hub and provide more than enough thread to get the tire back on. i actually got them on sale when they first came out vs spidertrax and dont regret it one bit

will do brutha! alot is riding on this paycheck i get tmrw, but i hope to get em soon!

haha we share similar taste is all man, go for it! give billy at bruteforce fab some more business. i love this stance but soon we will see what it looks like with a spindle lift

 

Right on. I wanna to do a spindle a lift but not ready to go up to 17's yet. Just put new rubbers on the stock 16's. Maybe in a year or 2 though

 

I have completely taken apart the front end spindles and all. Me, Andrew and Derrick could help you install your lift No problem man. Just replaced every single ujoint in my driveline and the carrier bearing as well. Thank you E-how!

 

right on man thanks for the help. maybe it will solve my tire rubbing problem.

 

Well then that makes it a shorter trip huh? haha plus i have my lifetime alignment at firestone here so i can do that right after

hopefully it works for you man, atleast it will help fix the rub on the UCA. since its pushed out it could cause some additional fender rub

 

Love that bumper! Can't wait tell someone makes it for a 2012

 

Haha I love that raptor grill on the 2012 by itself tho man!