Colorado B.S. Thread

^^^Assholes

^^^Cool guy

 

Riiiight. And I'm sure as a LEO that's the worst you've heard... Today.

 

I actually wasn't insulted today....until I saw your name as the most updated post on the thread...

 

Meh.

 

I kid.

I no kid.

 

Hey guys, anyone around the Westminster area could help me install my retrofit lights? Buy you a 12 pack or pay you somehow. Thanks

 

I plan on doing the same soon.

 

dk who has palladia here, but if you like slightly stoopid change it to the channel NOW

http://live.slightlystoopid.com/tri/

 

Hey bob, will you see jace before Sunday?

 

i can...i live down the road

shoot me a text man

 

Is the kit in the housing already and the lights just need to be installed or are you needing help with the tear down and install? I think NYCO is the only person in the CO group with experience on retro fit builds. I have a set of headlights I plan to do this to soon but it is a couple of months out still.

 

Just saw a preview for identy thief. It looks funny.

 

I need help with the tear down and install, I have no real experience with opening up the headlight, I bought a mini d2s kit. Just don't trust myself with opening up the headlight. Or if someone can help me with opening up the headlight, I can try the install myself?

 

remove all screws, rubber and lights

preheat the oven to 300*...when it hit 300*, turn it off...put headlight on a piece of cardboard or something (something that won't melt or burn)....

leave in there for 7-10 mins...take a flat head screwdriver and maybe some pliers and slowly separate a corner of the headlight...start with a corner then as you start to separate the pieces, the rest will separate easier and easier as you're able to get better grip on the two pieces..

remember to watch out for a few tabs that you will want to make sure you don't break...you'll see them

when you put them back together...first clean up the area as much as you can...you can either remove all the old sealant or clean it up a bit and add a bit of silicone sealant to help create a watertight seal...heat up the two pieces and put back together...put back in the oven for a couple more minute to heat up the sealant again a bit (helps allow you to push the two pieces together better)..take out and clamp together while it dries.

when the pieces are apart, follow directions with the retro kit...take your time and have a plan set out in your head or on paper before completing this...don't just wing it

 

noah, travis anyone else who wants to wheel. text me today. im working but lets set this up

 

Will do

 

so whos got the beigeish 2nd gen xcab with aftermarket front bumper and rock guards stock rims that got an emissions test today on s lipan off evans ... figured it was CoTacoTRD but his rear ones done too ... i was driving the pos red dodge neon in the next lane over

 

Was visiting