MARYLAND TACOMAS

I have that 3" lift on my truck an I have noticed some vibration I'm pretty sure it's the needle bearing in the front diff by what I read and how it feels. I know they won't do anything under warranty but will they fix this issue? I don't really know many garages in my small town area that I really trust. I hear east coast has a solution for this but I don't really wanna do this myself trying to find out what to do.

 

I am sure they will fix it. Probably hear about that issue all the time. You might even be able to hook up with someone here and they could help you fix it.

 

I just didn't know what toyota a fix would be replacing the diff or just the needle bear but If its that it will happen again due to poor design I want to get a east coast gear supply bushing put in as this seems to be the fix but dunno who to get to do so

 

Honestly I have no idea what the needle bearing is. I never had had this problem. I bet there is a thread somewhere here that someone had your same issue. If you find it, post up the link because I would like to know about your problem incase I ever have the issue.

 

http://www.tacomaworld.com/forum/showthread.php?t=152173
There's the link I'm just trying to figure out somewhere to get it done

 

There so far away in NC tho hum any ideas on who I can get to do mine

 

They were gonna replace diff under warranty an you have a lift I figured they wouldn't since the lift caused it

 

From the looks of the video on this link. http://eastcoastgearsupply.com/i-8536125-toyota-8-clamshell-bushing-and-tool.html

Seems anyone with basic know how can do it. Do you have anyone that can turn a wrench? Looks like it should only take about 30 mins a side.

 

This is unrelated but can you guys please log into Facebook and follow the instructions below please. Manda wants to win some dinner on a boat or some shit. She would be very much greatful.


Amanda Valenti
55 minutes ago near Bel Air ·
Please click the link and Vote for Steve & I! It is for us to win a dinner on the Spirit Cruise in Baltimore! Ends Friday (You can unlike the page after Friday!)

http://woobox.com/d48fx6/vote/for/190403

 

You only have to do drivers side. I can turn a wrench in not sure how to get the cv out and I'm just worried ill mess something up

 

I know I know I actually thought about taking the lift off and getting it fixed not that I wanna do that I'd rather find someone to put the ecgs bushing in

 

Here is a picture if the passenger side chip.

 

Chip.

I planned on adding eyelids to them to cover the chip but never did.

 

And the driver side.

 

New guy from MD. I got an invitation from Steve to check in here. I must confess I did not read all 2404 posts in this thread but I was assured that was not a problem. I did poke around randomly and it looks like you all don't have too high of standards so I'll fit right in.

Currently on my 3rd Toyota pick up. All 4x4s. 80, 85 and currently a 92. I'm going to look at a 2005 access cab 4x4, v6 manual TRD tomorrow. If anyone has any comments on this year or equipment I'd love to hear them. I am discouraged about frame rust that I am hearing about. Not good.

Tom

 

New guy....I'm in Severn. I've been a fan of Toyotas and wheeling since I was young but never had a one until Thurs. Just picked up a 2010 DC six speed six. Not sure what to do with the truck yet as it's the nicest ride I've had in years and I'm just enjoying the clean civilized ride. Just got rid of a 454 Suburban 2500 with muds that was my DD, hunt rig, dog truck, firewood, anything goes rig. Not quite ready to thrash this one and wear out ball joints.

JoshO....I'm interested in some of those goods if they are still around....

 

Welcome..

 

Sweet. Two more Maryland people. You other guys wouldn't realize how many people from Maryland join all the time. I was looking at the members list and searched for Maryland users that joined recently and messages like 15 of them... Ok maybe like the most recent 6 or 7 but I seemed like a lot more because it took so long. haha

 

And Joe. What do you think about them lights? I'm trying to buy the new lights but my lie dispenser said that I have to have a secured buyer before I order the new lights.

She is my responsible adult side. lol

 

Question about them I know to do the bhlm you had to open them can the be baked again and reopened? I actually want a set so in future I can retro