What Wheels FIT a Five Lug??

I've been trying to find a set of wheels for my 05 base model and its a pain I've narrowed it down to a few but then I find out they dont fit.
Post pics and wheel specs please (offset, Backspacing, and wheel width)....

 

im runnin into the same problem. no one can tell me what fits. id really like some 15 or 16 x8 alloys i dont want any larger of a wheel.

 

Your not kidding apparently quite a few people know what fits but no one wants to tell.

 

There are alot out there you just have to do your research. I have a set of Ultra Motorsports Rogue II currently on my truck. They are for sale!! Discount Tires also has a pretty good choice of wheels to choose from. They normally run about $150 a piece. You can also look wheels that will fit an X-runner, or any wheel that has a 5 on 4.5 bolt pattern.

 

Do you have the wheel specs im trying to figure out what fits. Not all 5x4.5 wheels fit apperently cragars won't fit. And the discount tire in town wanted $100 more than the NTB in town and the people who work there really don't care about people they look at them as money.

 

HERE'S 105 of them that TireRack.com says will fit. You can even see a picture of what they will look like on the truck.

 

Thanks but I'm tryin to go Steel wheel non factory in a 15 or 16 still looking though.

 

Stock wheels are 5x4.5 (5x114.3mm) 15x6 with +45-50mm offset and 60.1 center bore

If you want the new wheels to sit flush with the fender you need a 8 inch wide wheel with an offset from +30-35mm offset, (wider wheel increase offset, more narrow decrease offset) if you want them to stick out a bit you will need to run less offset than that. You can run a wheel with bigger center bore using center bore spacer.

 

So would Cragar soft 8's fit such as these:http://store.summitracing.com/partdetail.asp?autofilter=1&part=CRR-3985812&N=700+0&autoview=sku

 

Those should fit but the offset is negative, therefore it will stick out the wheels out of the fender you would also need the center hub spacer since the center bore is bigger in those. Overall I dont know if its such a good idea to run negative offset, you will be putting more stress on the bearings.

 

There are many variations to have a great wheel and tire setup. You can click on my signature and it will link you to the setup I am gonna build this summer. It is a my summer MOD list. I have to work for it, but it will be worth it!

I did my research and this is what I want on my 5 lug.

 

Damn neslerrah thats an awesome list, I look forward to seeing your truck with everything installed.

 

What about either of these:

http://store.summitracing.com/partd...793325+4294755966+4294911383+115&autoview=sku

http://store.summitracing.com/partd...755966+4294911383+4294795102+115&autoview=sku

http://store.summitracing.com/partd...755963+4294911383+4294793325+115&autoview=sku
which would be the best fit?

 

If I had to choose I would go with the second link although 6mm in offset difference between the two is not much, it should stick out very little from the fenders IMO it will look just right. Do you have a pic of what are you trying to shoot for looks wise? It would help.

 

Wish I did the truck is an 05 base sandmica metalic hoping to put 30x9.50's on it. Then hit the old boat ramp down the steep unforgiving trail back home and see if I can make it only 3 trucks have made it back up a Dodge 1ton an old Chevy and a 95 Tacoma with one hell of a lift.

 

Cool, as far as I know 30s fit with no problems, all the wheels you have posted so far fit, its just a matter of what do you like or dont like, meaning, how much do you want them to stick out like jeremieck truck in the pic posted above, or do you want them to sit flush with the fenders or only stick out a little bit.

On the three links you posted above the first two links the wheels will stick out a little bit, a little less than half an inch, the third link the wheel will stick out a bit more than half an inch. The Cragar 8s you first posted will stick out a little over one and a half inch.

 

I should also add that there are a few running similar wheels in base models around the forum I would try digging up old threads and sending PMs asking questions about their wheel specs.

 

Threads, (2nd link specially there are some base models with 30-31 tires and similar wheels)

http://www.tacomaworld.com/forum/wheels-tires/30639-rav-4-wheels-2005-5-lug-tacoma.html

http://www.tacomaworld.com/forum/4-cylinder/34565-4-banger-lifts-tires-2.html

 

Already done some of that with limmited succsess (improper specs or no comment back) what I worry about is having to shave the calipers I'm hoping I won't run into that problem.

 

Goodyear Wranglers MT/R 31x10.5R15 and Cragar 342 series 15x8, 4.5 backspacing

http://www.tacomaworld.com/forum/new-members/36535-new-before-after.html


EDIT: know that you already saw them, I can't find them either with that backspacing in 15" I do NOT see a reason why these won't fit with an offset of 0mm or 6mm with either 4 or 4.5 inch backspacing because you would be moving the wheel away from the truck, if it was the other way around I could see the problem.