T-Rey's Build

So after a year and 22,000 miles I am finally getting around to making my build thread. Done allot of things to it some big some small so I will try and list them all and add pics as I go. It started out as a 2012 TRD OR 4x4 with Entune JBL Package

INTERIOR MODS
Entune navigation package
Weather tech floor mats
Cobra 29lx CB
LED map and overhead bulbs
Center console lock mod
Extra 12v outlet in center console
Extra 120v power outlet in center console
Stinger flashlight mounted in center console
Viair compressor stored behind the rear seat
Hard wired Cobra radar detector
Ultra Gauge
ARB Fridge
Custom platform for fridge
Gerber Ax mounted to platform
Tech Deck (heavy Duty) with ram mount and X-grip
Fire extinguisher
Roof console switch panel
OTRATTW switches in roof console

SUSPENSION MODS
Toytec 3" lift with Eibach springs
AllPro Expo springs
Extended 5100 rear shocks
Rear extended brake lines
Spidertrax 1.25 Spacers
Toytec U-Bolt flip kit
285/75/16 BFG TKO A/T's

EXTERIOR MODS
Fog Light Anytime Mod
5" Cut off front mud flaps
Red Plasti dipped emblems all the way around
Bed lights mounted to the header rail
Fishing rod holders
4X Innovation sliders
4' Firestik CB antenna (red)
FJ Center cap mod for the stock TRD OR Wheels
Rear diff breather relocation
Bunch of stickers on the rear window
Hi-lift mounted in the bed
Relocated 7-Pin connector to bumper
Shorty antenna
Ruger trailer with RTT
Custom bed rack from ANB Fabrication
Pelfreybuilt fromt bumper
Yakima spare tire carrier mounted to bed rail with full size spare
CBI Ditch light brackets
Rigid duallys mounted to ditch brackets
ARB 78" Awning
Leer XR/100 Cap
B.A.M.F Antenna bracket
Relentless IFS skid plate
Bruteforce Fab HC Rear bumper

UNDER THE HOOD
Blue Seas Aux fuse block
Red line Hood Struts
Dynomax cat back system
TRD Supercharger
Die Hard Platinum group 31 Battery
Pelfreybuilt battery cage

FUTURE MODS
Skid plates (just need mid skid now)
LED Light bar
OBA


The day I bought it


THE LIFT







SPACERS







LIFT AND TIRES INSTALLED



SLIDERS



UNDER THE HOOD





EXHAUST







SOME ACTION SHOTS





WHEN RTT WAS MOUNTED IN THE BED




Power in the console



BED LIGHTS AND ROD HOLDERS



7 PIN RELOCATE



TRAILER AND RTT



COBRA 29LX





IN CHANNEL WINDOW VENTS



I will keep updating the build page as the never ending saga continues....

 

Nice truck! Wish I had the time to do some of this stuff. Looks like you are using your truck the right way.

 

Thanks. I do things when I get the time. Once I get closer to paying it off I'm sure I will get more into the heavy mods

 

Dang man I like the red emblems on that blue! Very nice truck my friend

 

Sweet looking truck! Looking forward to new mods

 

I just got the same cb as you, where did you mount yours?

 

Its in front of the sifter. I need to find my pics or I will take more and update the post

 

Thanks Tony

 

Updated pics to include the CB location

 

Ah gotcha, did you cut any out or just set it in there?

 

I had to cut the console. Not a bad fit for a full size CB

 

I think I'm going to cut it into my center console.

 

Ammo can storage???

 

Yes. This.

 

Nice, but do those move around?

 

No it does not. I have never had it slide or any movement from it

 

Nice!!

 

Made a platform for my new toy. ARB 50qt fridge. I was going to put behind the driver seat and made a platform for that, but decided that I would have more room on the passenger side. Once I test fitted and had it put together I put carpet to finish it off and it would match the interior carpet.
FIRST ATTEMPT. Difficult to bolt to the back of the truck and I would have to move my seat up


PASSENGER SIDE more room (down position)


Opens up


Still have access to below compartment


Adding carpet


Installed


Here is what is gonna take up the platform


Still need to have something keep the platform from lifting up and once I get that I will find a way to secure the fridge to the platform. I may use a tray or just the ARB hold downs

 

"Still need to have something keep the platform from lifting up and once I get that I will find a way to secure the fridge to the platform. I may use a tray or just the ARB hold downs"

Can you use a "L" bracket under the shelf and run a bolt back into where the oem bolt that holds seat hinge came from?
I will be building something similar for my fridge also, thanks for the ideas.