5100 level out of wack

I have a 2011 4wd TRD crew cab and just had installed bilstein 5100 adjustable front shocks set at 1.75. the front end is way higher than the back and the ride is horrible feels like it's bouncing with any bump. I did have the front end aligned. what am I missing.

 

I believe with the stock rear springs you set them at .85, not 1.75.

 

Unless you install an AAL or new leaf pack you will have "bro-lean" at 1.75

 

Do you have 3 or 4 leaf packs?

Edwin

 

double check the spring seat, you may have it upside down causing a higher then normal lift.

 

1.75" should still be even with the stock rear springs, I think you have them set to 2.5"

Even 1.75" wouldn't give you a highly noticeable bro lean

 

I had mine at 1.75" w/ out my blocks and it was a good .5-.75 higher in the front and once I installed the block the rear is a bit higher but I like the stance. Also, mine road awesome set at 1.75" with and without the block. Something isnt right if the ride didn't get noticeably better. Agreed on probably set at 2.5 you should be able to see where its sitting on the shock. Take a pic and post it

 

Mine was set at 1.75" w/ out the TSB and the front was at least .5 to .75 higher.

 

Pictures please of both sides!! Take one of the top for us and the bottom of each aide so we can see what it looks like.

 

Think we can consolidate posts next time?

 

Sure

 

It was put on upside down. thanks