Taco76087's 2004 Prerunner TRD Build

x2
Your truck is awesome i really want to do a mesh grill like yours

 

Thanks guys. Seperating the grille I just kind of ground the plastic welds flush then pulled the plastic "welds" that hold the grille together. You can see them all along the grille, that will seperate the grille into two pieces. There are quite a few of them, so make sure you get all of them. Then I cut the mesh to just slightly bigger than the inner grille piece. After the mesh was set in place, I put the two grille pieces together which should sit back onto the plastic welds, after that you melt the grille welds back together I used a small propane torch and heated up a screwdriver to melt the plastic. To make sure the welds stayed and the mesh stays I put a bead of silicone all along the inside of the grille where it isn't visible from the outside.

 

What I should start doing is if anyone is interested, you buy the partsgeek grille, send it to my address, then I make the grille, and ship it to whoever wants them

 

Thanks man

I got them from here :

http://www.suspensionconnection.com/cgi-bin/suscon/85250ta.html

And they are holding up great, the ride wasn't changed at all and they provide good lift.

 

Put a truxedo tonneau that i got from another member

 

I love this truck

 

After seeing your post on the Texas BS thread saying your in stephenville i wanted to check out your build and i like it!! Looks real clean and love the stance and wheels and good choice on Tires! Love my duratracs!

 

Thanks man might see you down there sometime.

 

alright man, your truck is awesome, i love the lift stance, so tell me, on your rims, what is the backspacing? you are so lucky about winnin them kings!!! im jealous!

 

Thanks!! The backspacing is 5.25" from what I've read here, but I have 1.25" spidertrax wheel spacers on all four corners to make the backspace 4" to accommodate my 285/75/16 tires. I know I couldn't believe when I got the call from them letting me know I had won

 

Got an All Pro Rear Bumper from a fellow member

Installing


Done

 

i like it better with that topper off btw.

 

I like it with and without the shell, but I'm partial.

 

is that 285/75r16 tires on a no lift rear?? kings coils in front are what, 3" lift?

 

285/75/16

3'' AAL in the back and Kings in the front at about 3" maybe 2.75"

 

Delete

 

Got some FJ TRD Trail Teams Wheels

 

Great looking rig man. I was curious about your ARE topper. What series is that? Also, did you make your sliders yourself or order them? Thanks man.