Bed Slide for Tacoma 5' bed

$600 - Designed to be sleek while delivering up to a half-ton of cargo, the BEDSLIDE 1000 offers 4-inch perimeter side rails for secure, safe stowage, transport and easy access. Drop this in the bed and your truck just got a lot better.

· 1000 lb. capacity
· 4-inch perimeter side rails
· Full width grab bar for easy access from either side
· Dual pin latch to eliminate binding
· Laser cut formed steel for precise, easy-glide action
· Multiple locking positions for safety and convenience
· Easy installation and removal system
· Rubberized skid-proof deck
· Stylish design

This is coming out of a Double Cab Toyota Tacoma so check the website to see if it will fit your truck. I used it with a tonneau cover and RTT and was very useful plus came in handy with hauling heavy stuff when bed was uncovered. It is only 6 months old and has seenlight use. This is a heavy duty bed slide that has save my back on a few occasions, I just am moving in a different direction with my truck set up. It would make a great addition to a work truck. They retail for $900 so this is a good deal. I have the installation instructions as well, but if you need installation I can refer you to a credible local garage. Thanks

 

I will consider offers just shoot me a PM.

 

cough!

 

Price reduction.....$500

 

Bump

 

I searched and searched and Searched for a used bed slide for my Tacoma! Could not find one anywhere so I built myself an all-aluminum unit.

How much does this one you have weigh?

PHM
------

 

I believe around 150 lbs.

 

Correction.......188 lbs

 

Bump for an interesting product

I have a long bed and I'm a long way from you, so your's is not for me.
I am researching them now that I've seen your's.
But I can't seem to find any details on fastening the Tracks to the bed.
Can you tell me if they fasten to the bed or do they use the bed bolts and fasten to the frame

Thanks for any info and good luck with sale


CC

 

This video will show the entire installation.

http://m.youtube.com/watch?v=2zTlIZhAP_E

 

Thanks for the reply.
A Video is worth a thousand words plus.


CC

 

bump

 

So I pulled the bed bolts and used longer bolts with an aluminum spacer block underneath the side rails to bolt down the bed slide rails. At the hardware store the longer bolts were SEVEN DOLLARS EACH! <g>

I couldn't find a used bedslide and didn't want to pay $1000. for new so I built one out of aluminum angle, channel, and diamond plate. I used 1 1/2" OD motor bearings (6203) along both sides - a 2" aluminum channel slides over them pretty closely to take both top and bottom loading.

I am being a nut about light weight with this truck. <g>

This weekend I am going to pull the bed slider out and set it up on 8" aluminum channel so I can put a 6" drawer underneath the sliding platform. When I have the bed slider out I'll weigh the parts and see what the total is.

PHM
------

 

bump

 

Bump

 

bump

 

Still have the bed slide?

 

Sorry....it sold