3'' RevTek, Can I run 285/70/17?

Ive noticed this question coming up alot and im sorry but, I have a 3' RevTek lift and was wondering if I could run 285/70/17?
Just curious in seeing what other people run with this lift..
thanks

 

I ran 285/70/17 on a 2.5" lift. I ran them on stock sport wheels so I had to use spidertrax spacers though. You should be fine

 

ok right, you think itd be fine even if I ran an agressive tire like km2's or similar to that?

 

You should be good.

 

Should be fine. If you have stock wheels spidertrax spacers might be smart

 

yeah i have 285s with my 2.5 inch pro comp. i removed front mud flaps little grinding when in reverse....

 

how about if I get some pretty offset rims, will it still have no issue?
I basicallly want the same setup your running as wheels and tires go.

 

You can run 285s with no wheel spacers if you buy wheels with 0 offset or less, dont go any lower than -12 offset though. Check out scs stealth 6's

Do you mean no issue as in no rubbing? Because there is a good chance you will rub

 

okay thank you, and yeah those rims are raww. definatly the style im looking for