Long Travel BS Thread

X2 aftermarket spindles have a way of doing that

 

Red thread lock will take care of that.

 

Lol takes an act of god to get them off tho!

 

Just an impact if you only use a drop. An impact and a torch if you use to much.

 

Small torch does the job. I did this when changing the rod ends on my coilovers and it worked like a charm.

 

Don't have a torch...prob why I've struggled, harbor freight for next job!

 

Get yourself a portable Mapp gas toch, it goes along way and they are super cheap at lowes.

 

I love mine! Work great in sand!!!

My bfg at are snowflake rated. U need to get below E load rating or they are not snow rated. Just FYI.

 

Ok cool, thanks man. I'm gonna give them a shot

 

Race dezert or dezert rangers may have some up

 

What kit are you going with? 8" coilovers vary with kits. Camburg and Chaos use a short body 8" that is more like a 7". Even if they do work, rod ends are longer with coilovers used in those kits to clear cv's.

 

One benefit of running standard 8s is the larger resi. They are 2x as big. More oil better? makes sense.

 

Hey guys this hanger snapped off my exhaust leaving a hole in it, can it just be cleaned and re-welded or do I need new tubing?

 

Bondo ftw!

 

JB weld....

Take it to a exhaust shop if you can't weld if yourself

 

I'd rub all that mud/dirt off if not grind it off and weld it back up

 

URD Y-Pipe time, to match those sexy headers you'll be running.

 

Hahah I knew you would say that once you saw the spot that broke
Btw I'm heading down to the shop this week to pickup my stock headers so I'll see if he has anymore info on the release date.

 

Mine broke off in the same spot. Had them weld a plate on then the hanger. My pipes look the exact same as yours..... ceramic coating lol

 

Do it do it do it!

Get V-Bands welded in there too, all stainless and have a beauty system end to end!